Indirectly heated diode designed for television horizontal-deflection damper service, with high heater-cathode insulation, roughly 5 kV peak-inverse capability, and substantial pulse-current handling.
High-voltage television damper diode designed for horizontal-deflection circuits, with approximately 5 kV peak-inverse rating, high pulse current, and controlled heater warm-up.
Half-wave vacuum rectifier designed primarily as a television horizontal-deflection damping diode, providing high inverse-voltage capability for sweep-circuit energy recovery.
High-voltage television horizontal-deflection damper diode with approximately 5 kV peak-inverse capability, high pulse current, and controlled heater warm-up.
Novar half-wave vacuum rectifier designed as a damper tube in television horizontal-deflection circuits, with controlled warm-up and high inverse-voltage capability.
Canadian Westinghouse 12B3 indirectly heated television horizontal-deflection damper diode with 12.6 V 0.6 A heater, 4400 V peak inverse voltage and cathode top cap.
Compactron single heater-cathode diode designed for television horizontal-deflection damper service, with high inverse-voltage capability and controlled heater warm-up.
Indirectly heated high-current television damper diode, electrically equivalent to 6BR3 except heater rating. Its controlled-warm-up construction is intended for horizontal-deflection energy-recovery service.
Half-wave vacuum rectifier designed for television horizontal-deflection damper service, supplied as a 12.6-volt-heater member of its damper-diode family.
Novar half-wave vacuum rectifier designed as a television horizontal-deflection damper tube, with approximately 5 kV peak-inverse capability and controlled warm-up.
Half-wave vacuum rectifier designed as a damper tube in television horizontal-deflection circuits, recovering sweep energy while withstanding high inverse voltage.
Half-wave vacuum rectifier designed as a damper tube in television horizontal-deflection circuits, explicitly documented as a heater variant of its corresponding family.
Indirectly heated diode designed for horizontal-frequency damper service, built to withstand the high-voltage pulses encountered in direct-drive television deflection circuits.
Indirectly heated half-wave rectifier designed specifically as a television horizontal-deflection damper diode, with high inverse-voltage and pulse-current capability.
Indirectly heated half-wave rectifier designed for television horizontal-deflection damper service, with high heater-cathode insulation and approximately 5 kV inverse-voltage capability.
Miniature high-voltage booster diode designed for line-time-base circuits of transformerless television receivers, with exceptionally high heater-cathode pulse-voltage capability.
Half-wave vacuum rectifier designed for television horizontal-deflection damper service, with approximately 5 kV peak-inverse capability and controlled heater warm-up.
Half-wave vacuum rectifier designed for television horizontal-deflection damper service, with high inverse-voltage and pulse-current ratings and controlled warm-up.
Half-wave vacuum rectifier designed for television damper service, explicitly a heater-voltage variant of the corresponding 6AY3 type with controlled warm-up.
Half-wave vacuum rectifier designed for television horizontal-deflection damper service, with approximately 5 kV peak-inverse capability and controlled heater warm-up.
Half-wave vacuum rectifier designed for television horizontal-deflection damper service, with approximately 5 kV inverse-voltage capability and high pulse current.
Compactron single heater-cathode diode designed for television horizontal-deflection damping, electrically related to 6BE3A/12BE3A except for heater characteristics.
Half-wave vacuum rectifier designed for television damper service, explicitly a heater-voltage variant of the corresponding 6BH3A type with controlled warm-up.
Half-wave vacuum rectifier designed specifically for television horizontal-deflection damper service, with controlled heater warm-up for series-string receiver operation.
Novar half-wave vacuum rectifier designed as a damper diode in television horizontal-deflection circuits; heater variant of the corresponding 6-volt type.
Half-wave vacuum rectifier designed for television horizontal-deflection damper service, handling the repetitive high-voltage pulses produced by the line-scan circuit.
Half-wave vacuum rectifier intended for television horizontal-deflection damper service, providing energy-recovery rectification in the line-scan circuit.
Half-wave vacuum rectifier for television damper service, using controlled heater warm-up and heater characteristics suited to series-string receivers.
High-voltage television damper diode with controlled heater warm-up, designed for horizontal-deflection energy-recovery service in series-string receivers.
Half-wave vacuum rectifier used as a damper tube in television horizontal-deflection circuits, supplied as a heater-voltage variant of its 6-volt parent.
Indirectly heated half-wave rectifier designed for television horizontal-deflection damper service, electrically related to the 6DA4 apart from heater characteristics.
High-voltage indirectly heated diode for television horizontal-frequency damper service, designed to withstand large cathode-to-heater and cathode-to-plate pulses in direct-drive circuits.
Television damper diode designed for horizontal-deflection energy-recovery service, with high-voltage rectifier characteristics appropriate to line-scan circuits.
Indirectly heated diode designed for television horizontal-deflection damper service, with high heater-cathode insulation, roughly 5 kV peak-inverse capability, and substantial pulse-current handling.
High-voltage television damper diode designed for horizontal-deflection circuits, with approximately 5 kV peak-inverse rating, high pulse current, and controlled heater warm-up.
Half-wave vacuum rectifier designed primarily as a television horizontal-deflection damping diode, providing high inverse-voltage capability for sweep-circuit energy recovery.
High-voltage television horizontal-deflection damper diode with approximately 5 kV peak-inverse capability, high pulse current, and controlled heater warm-up.
Novar half-wave vacuum rectifier designed as a damper tube in television horizontal-deflection circuits, with controlled warm-up and high inverse-voltage capability.
Canadian Westinghouse 12B3 indirectly heated television horizontal-deflection damper diode with 12.6 V 0.6 A heater, 4400 V peak inverse voltage and cathode top cap.
Compactron single heater-cathode diode designed for television horizontal-deflection damper service, with high inverse-voltage capability and controlled heater warm-up.
Indirectly heated high-current television damper diode, electrically equivalent to 6BR3 except heater rating. Its controlled-warm-up construction is intended for horizontal-deflection energy-recovery service.
Half-wave vacuum rectifier designed for television horizontal-deflection damper service, supplied as a 12.6-volt-heater member of its damper-diode family.
Novar half-wave vacuum rectifier designed as a television horizontal-deflection damper tube, with approximately 5 kV peak-inverse capability and controlled warm-up.
Half-wave vacuum rectifier designed as a damper tube in television horizontal-deflection circuits, recovering sweep energy while withstanding high inverse voltage.
Half-wave vacuum rectifier designed as a damper tube in television horizontal-deflection circuits, explicitly documented as a heater variant of its corresponding family.
Indirectly heated diode designed for horizontal-frequency damper service, built to withstand the high-voltage pulses encountered in direct-drive television deflection circuits.
Indirectly heated half-wave rectifier designed specifically as a television horizontal-deflection damper diode, with high inverse-voltage and pulse-current capability.
Indirectly heated half-wave rectifier designed for television horizontal-deflection damper service, with high heater-cathode insulation and approximately 5 kV inverse-voltage capability.
Miniature high-voltage booster diode designed for line-time-base circuits of transformerless television receivers, with exceptionally high heater-cathode pulse-voltage capability.
Half-wave vacuum rectifier designed for television horizontal-deflection damper service, with approximately 5 kV peak-inverse capability and controlled heater warm-up.
Half-wave vacuum rectifier designed for television horizontal-deflection damper service, with high inverse-voltage and pulse-current ratings and controlled warm-up.
Half-wave vacuum rectifier designed for television damper service, explicitly a heater-voltage variant of the corresponding 6AY3 type with controlled warm-up.
Half-wave vacuum rectifier designed for television horizontal-deflection damper service, with approximately 5 kV peak-inverse capability and controlled heater warm-up.
Half-wave vacuum rectifier designed for television horizontal-deflection damper service, with approximately 5 kV inverse-voltage capability and high pulse current.
Compactron single heater-cathode diode designed for television horizontal-deflection damping, electrically related to 6BE3A/12BE3A except for heater characteristics.
Half-wave vacuum rectifier designed for television damper service, explicitly a heater-voltage variant of the corresponding 6BH3A type with controlled warm-up.
Half-wave vacuum rectifier designed specifically for television horizontal-deflection damper service, with controlled heater warm-up for series-string receiver operation.
Novar half-wave vacuum rectifier designed as a damper diode in television horizontal-deflection circuits; heater variant of the corresponding 6-volt type.
Half-wave vacuum rectifier designed for television horizontal-deflection damper service, handling the repetitive high-voltage pulses produced by the line-scan circuit.
Half-wave vacuum rectifier intended for television horizontal-deflection damper service, providing energy-recovery rectification in the line-scan circuit.
Half-wave vacuum rectifier for television damper service, using controlled heater warm-up and heater characteristics suited to series-string receivers.
High-voltage television damper diode with controlled heater warm-up, designed for horizontal-deflection energy-recovery service in series-string receivers.
Half-wave vacuum rectifier used as a damper tube in television horizontal-deflection circuits, supplied as a heater-voltage variant of its 6-volt parent.
Indirectly heated half-wave rectifier designed for television horizontal-deflection damper service, electrically related to the 6DA4 apart from heater characteristics.
High-voltage indirectly heated diode for television horizontal-frequency damper service, designed to withstand large cathode-to-heater and cathode-to-plate pulses in direct-drive circuits.
Television damper diode designed for horizontal-deflection energy-recovery service, with high-voltage rectifier characteristics appropriate to line-scan circuits.