Data set 01
1961 Tung Sol
Published operating points and test conditions from this source.
Rectifier
Other
TransientPeakPlateCurrent
3 A
Rectifier - Damper Diode ·Rectifier
High-voltage television horizontal-deflection damper diode with controlled heater warm-up and several-kilovolt peak-inverse capability.
High-voltage damper diode for television horizontal-deflection service.
International Octal
General specifications
Properties common to every published source and operating point.
Electrical assignments shared by every tube using this base designation.
| Terminal | Section | Connection | Evidence |
|---|---|---|---|
| PIN1IC | — | IC EIA chart transcription; independent manufacturer corroboration pending | Unverified EIA Base Connections, printed page 127, 4CG |
| PIN2IC | — | IC EIA chart transcription; independent manufacturer corroboration pending | Unverified EIA Base Connections, printed page 127, 4CG |
| PIN3K | A | K — Cathode EIA chart transcription; independent manufacturer corroboration pending | Unverified EIA Base Connections, printed page 127, 4CG |
| PIN5P | A | P — Plate (Anode) EIA chart transcription; independent manufacturer corroboration pending | Unverified EIA Base Connections, printed page 127, 4CG |
| PIN7H | — | H — Heater EIA chart transcription; independent manufacturer corroboration pending | Unverified EIA Base Connections, printed page 127, 4CG |
| PIN8H | — | H — Heater EIA chart transcription; independent manufacturer corroboration pending | Unverified EIA Base Connections, printed page 127, 4CG |
1 physical section, each with unique specifications.
Section 1
Reference/equivalence-only source does not reproduce the referenced electrical ratings/characteristics; promoted values intentionally not inferred from external datasheets.
Source-dependent data
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 01
Published operating points and test conditions from this source.
TransientPeakPlateCurrent
3 A
Data set 02
Published operating points and test conditions from this source.
Peak inverse voltage
5000 V
Peak plate current
1000 mA
DC plate current
165 mA
Heater-to-cathode capacitance
4 pF
Plate-to-cathode/heater capacitance
5 pF
Data set 03
Published operating points and test conditions from this source.
HEATER VOLTAGE X
6.5 V
Published datasheet
HEATER CURRENT D
45 A
Published datasheet
TUBE VOLTAGE DROP WITH TUBE CONDUCTING
32 V
Published datasheet
A APPLICABLE WHERE THE DUTY LY CLE Of THE VOLTAGE PUL BE DOES NOT EXCEED
154 V
Published datasheet
ENE ATER WARM-UP TINE IS DEFINED AS THE TINE REQUIRED FOR THE VOLTAGE ACA O
55 V
Published datasheet
DC COMPONENT
9 V
Published datasheet
TOTAL DC AND PEAK
4 V
Published datasheet
MAXIMUM PEAK INVERSE PLATE VOLTAGE A
4000 V
Published datasheet
MAXIMUM STEADY STATE PEAK PLATE CURRENT
600 mA
Published datasheet
MAXIMUM TRANSIENT PEAK ELATE CUR RENTC
3 mA
Published datasheet
MAXIMUM DC OUTPUT CURRENT
125 mA
Published datasheet
HEATER WARM-UP TIME ~APPROX.~#
11 s
Published datasheet
CYCLE, AND ITS DURATION IS LIMITED TO
10 s
Published datasheet
CTXIS RATING APPLIES TO HOT SWITCNI NG WHERE TRANSIENT DURATION DOES NOT E%C EED
0.2 s
Published datasheet
TUN G-SOL ELECTRIC INC. EL ECINON TUBE DIVISION BL OOMFI ELD NEW JERSEY. U. S.A- MAY l r
677 mA
Published datasheet
Ef =
16.8 V
Published datasheet
Data set 04
Published operating points and test conditions from this source.
Heater Warmup Time
11 s