Electronic tube and vacuum tube catalog

Base

—

Socket code

—

Sections

1

Amperex ten-stage photomultiplier with at least a 32 mm useful photocathode diameter for sensitive optical measurement.

Base

—

Socket code

B12F

Sections

1

Plate

0.5 W

B12F - All-glass CRT 12-contact

Amperex photomultiplier with extended spectral response reaching approximately 800 nm for visible and near-infrared light detection.

Base

—

Socket code

—

Sections

1

Plate

0.5 W

Amperex ten-stage photomultiplier with at least a 14 mm useful photocathode diameter for sensitive light measurement.

Base

B8 700 4G

Socket code

B14F

Sections

1

Plate

0.5 W

14 pins - B14F - All-glass CRT 14-contact

Amperex eleven-stage photomultiplier for high-gain detection of weak optical signals.

Base

—

Socket code

—

Sections

1

Heater

0 V / 0 mA

High-sensitivity gas phototube with low dark current and low microphony for critical industrial photoelectric applications.

Base

—

Socket code

UX6

Sections

1

UX6 - Small 6-contact

RCA iconoscope television camera pickup tube optimized particularly for motion-picture film and slide scanning.

Base

—

Socket code

—

Sections

1

Heater

6.3 V / 600 mA

Image-orthicon television camera pickup tube designed for simultaneous color-image acquisition.

Base

—

Socket code

—

Sections

1

Near-infrared image-converter tube using electrostatic focusing and a P20 phosphor screen to produce a visible image.

Base

—

Socket code

—

Sections

1

Plate

1,250 V

11 pins

RCA 1P21 nine-stage side-on photomultiplier tube with S-4 cesium-antimony photocathode, peak spectral response near 400 nm and high gain for low-light detection.

Base

—

Socket code

—

Sections

1

Plate

1,250 V

11 pins

RCA 1P22 nine-stage side-on S-8 photomultiplier tube with cesium-bismuth photocathode and cesium-antimony dynodes, designed for colorimetry, spectroscopy and low-light measurement.

Base

2K

Socket code

—

Sections

1

Gas-filled two-electrode phototube with S-1 photocathode for photoelectric light detection.

Base

Refer to variations

Socket code

Refer to variations

Sections

1

Two-electrode vacuum cartridge phototube for compact photoelectric light-detection applications.

Base

—

Socket code

—

Sections

1

Plate

4,500 V

Infrared-sensitive electrostatic image-converter tube that transforms a photocathode image into a visible fluorescent image.

Base

—

Socket code

—

Sections

1

Gas-filled two-electrode phototube with enhanced sensitivity in the red and infrared spectral regions.

Base

—

Socket code

—

Sections

1

Gas-filled two-electrode phototube with high red and infrared sensitivity for photoelectric detection.

Base

—

Socket code

—

Sections

1

Plate

1,250 V

Ik max

0.5 mA

Nine-stage ultraviolet-sensitive photomultiplier for scientific measurement and scintillation-counting applications.

Base

2K

Socket code

—

Sections

1

Plate

100 V

4 pins

RCA 1P29 gas-filled side-on S-3 photoemissive detector with semicylindrical photocathode, peak response near 420 nm, and gas amplification up to 9.

Base

2G

Socket code

B12A

Sections

1

Plate

90 V

4 pins - B12A - Duodecal 12-contact

Gas-filled two-electrode phototube with S-1 spectral response for general photoelectric light detection.

Base

—

Socket code

B12A

Sections

1

Plate

95 V

B12A - Duodecal 12-contact

Gas-filled two-electrode S-1 phototube for photoelectric measurement and light-detection applications.

Base

2F

Socket code

B12A

Sections

1

Plate

90 V

3 pins - B12A - Duodecal 12-contact

Gas-filled two-electrode S-1 phototube intended for general photoelectric light detection.

Base

2X

Socket code

B12A

Sections

1

Plate

95 V

4 pins - B12A - Duodecal 12-contact

Gas-filled two-electrode S-1 phototube for optical sensing and photoelectric measurement.

Base

2G

Socket code

B12A

Sections

1

Plate

90 V

4 pins - B12A - Duodecal 12-contact

Gas-filled two-electrode S-1 phototube designed for general-purpose photoelectric detection.

Base

—

Socket code

B12A

Sections

1

Plate

90 V

3 pins - B12A - Duodecal 12-contact

Gas-filled two-electrode phototube using an S-1 photosensitive cathode for optical detection.

Base

—

Socket code

B12A

Sections

1

Plate

90 V

4 pins - B12A - Duodecal 12-contact

Gas-filled two-electrode S-1 phototube for photoelectric light-detection applications.

Base

2K

Socket code

—

Sections

1

Plate

100 V

4 pins

RCA 1P37 gas-filled side-on S-4 photoemissive detector with blue-light sensitivity, semicylindrical photocathode and gas amplification up to 5.5.

Base

—

Socket code

—

Sections

1

Plate

250 V

Ik max

0.005 mA

RCA 1P39 high-vacuum S-4 blue-sensitive photoemissive detector, electrically similar to RCA 929 but with a non-hygroscopic base for low leakage under high humidity.

Base

—

Socket code

—

Sections

1

Plate

90 V

3 pins

RCA 1P41 gas-filled head-on S-1 photoemissive detector with red/near-infrared sensitivity, peak response near 800 nm and gas amplification up to 8.5.

Base

—

Socket code

—

Sections

1

Plate

180 V

Ik max

0.0004 mA

2 pins

RCA 1P42 miniature high-vacuum head-on S-9 photoemissive detector with semitransparent circular photocathode, peak response near 480 nm, and opposed end terminals.

Base

—

Socket code

—

Sections

1

Plate

500 V

Vacuum silver-cesium phototube sensitive to visible and infrared radiation for photoelectric measurement equipment.

Base

—

Socket code

IO

Sections

1

Min/Max I

75 mA

IO - International Octal

Cold-cathode glow modulator designed as an electrically modulated light source in facsimile equipment.

Base

—

Socket code

—

Sections

1

Plate

100 V

Gas-filled cesium phototube sensitive to visible and infrared radiation for photoelectric measurements and film-projector sound adapters.

Base

—

Socket code

—

Sections

1

AEI photoemissive detector tube for industrial optical sensing and measurement applications.

Base

—

Socket code

—

Sections

1

AEI photoemissive detector tube for photoelectric measurement and industrial light-sensing applications.

Base

—

Socket code

—

Sections

1

AEI photoemissive detector tube intended for industrial optical measurement and light-detection service.

Base

—

Socket code

—

Sections

1

Nine-stage photoelectric multiplier designed for detecting and amplifying very weak visible-light signals.

Base

—

Socket code

—

Sections

1

AEI photoemissive detector tube for sensitive industrial photoelectric measurement applications.

Base

—

Socket code

—

Sections

1

AEI photoemissive detector tube for industrial optical sensing, an updated variant of the 27M12 family.

Base

—

Socket code

—

Sections

1

11 pins

AEI photoelectric device documented with manufacturer ratings and characteristics. The available source establishes optical detection service, but the extracted description does not expose enough construction detail to classify it more narrowly than a general phototube.

Base

—

Socket code

—

Sections

1

11 pins

Nine-stage visible-response photoelectric multiplier designed for very low light levels, light-operated relays, and sensitive photometric applications. Its cascaded multiplication stages provide substantial gain from weak visible-light signals.

Base

—

Socket code

—

Sections

1

11 pins

Nine-stage ultraviolet-sensitive photoelectric multiplier for low-light work, relays, film scanning, facsimile transmission, and scientific research. Its multiplier structure provides high sensitivity to weak ultraviolet optical signals.

Base

—

Socket code

JUMBOANNULAR7

Sections

1

JUMBOANNULAR7 - Jumbo annular 7-contact shoulder base

Image-orthicon television camera tube using a semitransparent photocathode, magnetic focusing and deflection, and electron-multiplier output. It converts an optical image into a scanned electrical television signal.

Base

—

Socket code

—

Sections

1

Heater

6.3 V / 600 mA

Plate

1,650 V

Image-orthicon television camera tube using magnetic focusing and deflection, a semitransparent photocathode, and electron-multiplier output. Designed for sensitive television image pickup rather than simple point light detection.

Base

—

Socket code

—

Sections

1

Heater

6.3 V / 600 mA

Plate

1,650 V

Highly sensitive image-orthicon television camera tube intended especially for outdoor pickup. Magnetic focusing and deflection scan the photoelectron image, providing useful television signals at comparatively low scene illumination.

Base

—

Socket code

—

Sections

1

Plate

500 V

Ik max

0.003 mA

High-vacuum potassium-cathode photoelectric cell for direct light detection and measurement. Its photocathode generates current in response to incident radiation without internal electron multiplication.

Base

—

Socket code

—

Sections

1

Plate

500 V

Ik max

0.005 mA

4 pins

High-vacuum caesium-cathode photoelectric cell for direct light detection and measurement. Its photosensitive cathode produces a current proportional to incident illumination without an internal multiplication structure.

Base

—

Socket code

—

Sections

1

Philips photoelectric tube for direct light detection and measurement. Manufacturer documentation provides construction, ratings, characteristics, operating data, and stated applications for converting incident light into an electrical photocurrent.

Base

—

Socket code

—

Sections

1

Plate

100 V

Ik max

0.0075 mA

Gas-filled caesium-cathode photoelectric cell for direct light detection. Gas amplification increases output relative to a high-vacuum photocell while retaining the basic single-photocathode photoelectric detection function.

Base

—

Socket code

B4

Sections

1

Plate

100 V

B4 - European 4-pin base

Gas-filled red- and infrared-sensitive phototube using a cesium-on-oxidized-silver photocathode with approximately 2.25 cm² projected sensitive area. Designed for direct detection of longer-wavelength visible and near-infrared radiation.

Base

—

Socket code

—

Sections

1

Philips caesium-cathode photoelectric cell for direct light detection. Manufacturer data specify its photoelectric characteristics and operating conditions for converting incident optical radiation into measurable photocurrent.

Base

—

Socket code

—

Sections

1

Plate

100 V

Gas-filled red- and infrared-sensitive phototube using a cesium-on-oxidized-silver photocathode with approximately 1.35 cm² sensitive area. Gas filling enhances output for longer-wavelength optical detection.