Specialized - Photo Tube ·PhotoemissiveDetector
1P41
RCA 1P41 gas-filled head-on S-1 photoemissive detector with red/near-infrared sensitivity, peak response near 800 nm and gas amplification up to 8.5.
- Sections
- 1
- Base
- -
- Socket code
- -
- Base pins
- 3
- Nominal heater
- -
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- -
- Base pins
- 3
- Nominal heater voltage
- -
- Nominal heater current
- -
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
PhotoemissiveDetector
- Max plate voltage
- 90 V
RCA 1P41 gas-filled S-1 head-on photoemissive detector. 1957 alternative absolute rating regimes: Rating I anode max 70 V, average cathode current max 3 µA, current density max 40 µA/in²; Rating II anode max 90 V, average cathode current max 1.5 µA, density max 20 µA/in². Promoted 90 V conditional on Rating II, cannot combine with Rating I current. Earlier 1950 peak cathode current max 5 µA. Max ambient 100 °C. Peak S-1 response 800±100 nm, median radiant sensitivity 0.008 A/W at 800 nm; median luminous sensitivity 90 µA/lm DC, 77 µA/lm at 5 kHz, 67 µA/lm at 10 kHz. Gas amplification factor max 8.5, dark current max 0.1 µA at 25 °C, interelectrode capacitance 1.8 pF. No heater.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
