Specialized tube type
Specialized - Switching Tube vacuum tubes
Specialized - Switching Tube records in Tube Tinker cover 582 tube designations, including 1,033 preserved original datasheets. Compare bases, sockets, heater requirements, construction, exact variations, and directional replacement options.
- Tube records
- 582
- Original datasheets
- 1,033
- Variation families
- 18
- Tubes with alternatives
- 23
About Specialized - Switching Tube tubes
If the tube is described as a switching tube, transmit/receive etc. then apply this type.
Electrical range
- Nominal heater voltage
- 0–27 V
- Nominal heater current
- 0–1,800 A
Common specialized - switching tube characteristics
These are the most frequently recorded attributes among tubes in this category.
Bases
- B12E2
- B7G2
- Duodecal2
- Special 13-pin2
- 4CK1
- 4V1
- 6AR1
- 9AD1
Sockets
- B9A23
- UX415
- IO12
- B7G11
- B12A5
- SK1005
- B26A4
- B13B2
Constructions
- MicrowaveTRSwitch215
- SparkGapPulseSwitch85
- CounterSelectorSwitch37
- Tetrode37
- Thyratron37
- RelayControlSwitch33
- SurgeProtector33
- BeamSwitchingCommutator19
Specialized - Switching Tube tube list
Page 12 of 13
UAM600 SurgeProtector
Subminiature flying-lead surge arrester designed for primary protection of 220 V AC apparatus against momentary low-energy surge voltages.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
VLS631 ThermalDelaySwitch
Miniature thermal-delay switch designed to delay application of anode voltage to indirectly heated valves and mercury-vapor rectifiers, with a specified delay around 44–66 seconds at room temperature.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
VLS63I ThermalDelaySwitch
Probable alternate rendering of the VLS631 miniature thermal-delay switch; no independent source artifact is presently attached, so the functional assignment follows the corresponding documented designation conservatively.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
VS10G CounterSelectorSwitch
Ten-way Trochotron beam-switching tube designed for electronic counting, sequencing, and commutation by steering an electron beam among multiple output positions.
- Base
- Not recorded
- Socket
- B26A
- Heater
- 6.3 V
- Sections
- 1
VS10GM CounterSelectorSwitch
Ten-way Trochotron beam-switching tube designed for electronic counting, sequencing, and commutation by steering an electron beam among multiple output positions.
- Base
- Not recorded
- Socket
- B26A
- Heater
- 6.3 V
- Sections
- 1
VS10H CounterSelectorSwitch
Ten-way Trochotron beam-switching tube designed for electronic counting, sequencing, and commutation by steering an electron beam among multiple output positions.
- Base
- Not recorded
- Socket
- B26A
- Heater
- 6.3 V
- Sections
- 1
VS10K CounterSelectorSwitch
Ten-way Trochotron beam-switching tube designed for electronic counting, sequencing, and commutation by steering an electron beam among multiple output positions.
- Base
- Not recorded
- Socket
- B26A
- Heater
- 6.3 V
- Sections
- 1
WF42 MicrowaveTRSwitch
Broadband X-band TR gas-discharge cell for branched or balanced radar duplexers, specifically developed for high reliability and long life at substantial transmitter line power.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
WF43 MicrowaveTRSwitch
Broadband X-band TR gas-discharge cell for branched or balanced radar duplexers, designed for high reliability and long life at substantial transmitter line power.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
WF44 MicrowaveTRSwitch
Broadband X-band TR gas-discharge cell with separate DC and pre-pulse keep-alive electrodes, designed for branched or balanced radar duplexer systems.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
WF45 MicrowaveTRSwitch
Self-operating broadband X-band TR gas-discharge cell covering approximately 8.49–9.58 GHz for radar duplexers, equivalent to American type 1B63A.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
XD45 Triode
Forced-air-cooled pulse power triode for amplifier and modulator-switch service. Approximately 25 kV plate capability and substantial dissipation support demanding high-voltage pulsed-power and switching applications.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 11 V
- Sections
- 1
YS245 SurgeProtector
Inert-gas surge arrester with approximately 245 V nominal striking voltage, designed to protect telecommunication and signalling systems against lightning and earth-return overvoltages.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
YS350 SurgeProtector
Inert-gas surge arrester family designed to protect telecommunication and signalling systems against lightning, earth-return, and related transient overvoltages.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
Z07100U Thyratron
Cold-cathode noble-gas power switching tube for controlled DC, AC, and pulse switching. Heaterless discharge handles substantial switched current.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
Z0710U Thyratron
Cold-cathode mixed-gas power switching tube for controlled DC or AC service. Heaterless gas discharge provides substantial switching current.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
Z1100U Thyratron
Cold-cathode noble-gas power switching tube for controlled DC or AC service. Heaterless discharge provides high-current electronic switching.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
Z3001 Thyratron
Cold-cathode trigger tube for pulse and control circuits. Gas-discharge operation provides abrupt heaterless switching.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
Z300T Thyratron
Cold-cathode trigger tube for welding timers, relay and counting circuits, and power switching. Heaterless gas discharge provides rapid control.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
Z50T Thyratron
Cold-cathode trigger tube for on-off switching control. Gas discharge provides abrupt heaterless electronic switching.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
Z5823 Thyratron
Cold-cathode gas switching tube of the 5823 family. Available source material supports relay/control service without a narrower description.
- Base
- Not recorded
- Socket
- B7G
- Heater
- Not recorded
- Sections
- 1
Z656C CounterSelectorSwitch
The Z656C is catalogued as a specialized electronic counter-selector switching tube. Such gas-discharge devices provide sequential switching or counting using controlled cathode discharges. Its precise electrode arrangement and electrical specifications require confirmation from a datasheet explicitly identifying Z656C rather than a similarly numbered type.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
Z660W Thyratron
Cold-cathode gas switching tube. Available source material confirms heaterless discharge-switching construction without supporting a narrower application.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
Z661W Thyratron
Cold-cathode gas switching tube. Available source material confirms heaterless discharge-switching construction without supporting a narrower application.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
Z700U Thyratron
Subminiature cold-cathode trigger tube for counting and switching circuits. Heaterless gas discharge provides compact digital control.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
Z70U Thyratron
Cold-cathode gas-discharge switching tube. Available source material confirms heaterless thyratron-type construction but does not establish a narrower application.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
Z70W Thyratron
Cold-cathode gas-discharge switching tube. Available source material confirms heaterless thyratron-type construction but does not establish a narrower application.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
Z71U TriggerPulseSwitch
Cold-cathode trigger and pulse switching tube. Available source classification establishes gas-discharge trigger service without enough detail for a narrower operating description.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
Z71U0 TriggerPulseSwitch
Cold-cathode trigger and pulse switching tube. Available source classification establishes gas-discharge trigger service without enough detail for a narrower operating description.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
Z803U RelayControlSwitch
Cold-cathode relay and control switching tube. Available source classification establishes heaterless gas-discharge control service without enough detail for a narrower description.
- Base
- Not recorded
- Socket
- B7G
- Heater
- Not recorded
- Sections
- 1
Z804U Thyratron
Cold-cathode negative-trigger tube for relay and switching operation from AC or DC supplies. Heaterless gas discharge provides abrupt electronic control.
- Base
- Not recorded
- Socket
- B9A
- Heater
- Not recorded
- Sections
- 1
Z805U TriggerPulseSwitch
Cold-cathode trigger and pulse switching tube. Gas-discharge operation provides abrupt heaterless switching for pulse and control circuits.
- Base
- Not recorded
- Socket
- B9A
- Heater
- Not recorded
- Sections
- 1
Z860X Thyratron
Cold-cathode gas-discharge switching tube in a nine-pin miniature envelope. Available source material does not establish a narrower functional application.
- Base
- Not recorded
- Socket
- B9A
- Heater
- Not recorded
- Sections
- 1
Z861X Thyratron
Cold-cathode gas-discharge switching tube in a nine-pin miniature envelope. Available source material does not establish a narrower functional application.
- Base
- Not recorded
- Socket
- B9A
- Heater
- Not recorded
- Sections
- 1
Z862E TriggerPulseSwitch
The Z862E is a noble-gas-filled, cold-cathode electrometer discharge tube intended for extremely low-current control circuits. It is suitable for triggering from ionization chambers and other high-resistance sensing devices. Its discharge switching action provides electrical control without a heated cathode.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
Z863X RelayControlSwitch
The Z863X is a noble-gas-filled cold-cathode relay-control tube developed for DC switching, counting, and relay circuits. It uses a negative triggering-electrode potential to initiate conduction. The device provides gas-discharge switching in specialized industrial and electronic-control equipment.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
Z865W RelayControlSwitch
The Z865W is a cold-cathode, noble-gas-filled relay tube designed for DC and AC control applications. Its relatively low triggering-voltage requirement allows interfacing with transistorized circuits. The tube is intended for relay switching, counting, and related industrial electronic-control functions.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
Z9001 TriggerPulseSwitch
Cold-cathode trigger tube for pulse and control circuits. Gas ionization provides abrupt heaterless switching in response to a trigger condition.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
Z900T Thyratron
Cold-cathode trigger tube for switching and control circuits. Gas-discharge operation provides abrupt heaterless switching.
- Base
- MINIATURE
- Socket
- B7G
- Heater
- Not recorded
- Sections
- 1
ZA1002_7B SwitchingOther
The ZA1002 is a cold-cathode, neon-filled subminiature switching and light-emitting diode. It provides a stable difference between ignition and sustaining voltages, allowing low-speed electronic switching and counting. Its visible red discharge can be used with photosensitive components in optical control circuits.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
ZA1004_7B SwitchingOther
The ZA1004 is a subminiature cold-cathode neon indicator diode designed for visible electrical readout and control. Its rod-shaped molybdenum cathode and surrounding gauze anode produce a red glow discharge. It can operate with low-voltage transistor control circuitry and photosensitive components.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
ZA1006_7B SwitchingOther
The ZA1006 is a long-life neon-filled switching and light diode designed for electronic touch-control applications. Its stable ignition and maintaining-voltage separation supports capacitive-control circuitry, including electronic radio and television tuners. The compact cold-cathode construction offers resistance to shock and vibration.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
ZC1010 RelayControlSwitch
Subminiature cold-cathode glow-relay tube with two equivalent starter electrodes and auxiliary anode for counting, multivibrator, and relay-control circuits.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
ZC1040 Thyratron
Gas-filled cold-cathode trigger tube with molybdenum cathode and electrical priming. Priming improves reliable, repeatable switching.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
ZC1050 Thyratron
Ruggedized cold-cathode trigger tube with high light output for shift-register displays, combining electronic switching with visible indication.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
ZC1060 Thyratron
Subminiature cold-cathode trigger tube for very-high-peak-current capacitor-discharge switching. Heaterless gas discharge provides compact pulse-power control.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
ZM1060 CounterSelectorSwitch
High-speed cold-cathode decade counting, display, and switching tube. Sequential gas-discharge transfer performs decimal counting while providing direct visual indication.
- Base
- Special 13-pin
- Socket
- B13B
- Heater
- Not recorded
- Sections
- 1
ZM1070 CounterSelectorSwitch
Cold-cathode decade counting, display, and switching tube supporting bidirectional counting. Sequential gas-discharge transfer provides electronic counting and visible indication.
- Base
- Special 13-pin
- Socket
- B13B
- Heater
- Not recorded
- Sections
- 1
