Tube cross-reference
6096 alternatives, equivalents, and replacements
Review exact electrical variations and directional substitutions recorded for the 6096 voltage pentode - sharp cutoff (single). Compare core specifications and verify every restriction before using a replacement.
Replacement tubes for 6096
The following tubes are recorded as possible replacements for 6096. This direction does not establish that 6096 can replace them.
Voltage Pentode - Sharp Cutoff (single)
The database records 5654 as a possible replacement for6096.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | Not recorded | E7-1 |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.175 A | 0.175 A |
Voltage Pentode - Sharp Cutoff (single)
The database records 6AK5W as a possible replacement for6096.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | Not recorded | 7BD |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.175 A | 0.175 A |
Voltage Pentode - High Frequency (single)
The database records DP61 as a possible replacement for6096.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - High Frequency (single) |
| Construction | Pentode | Pentode |
| Base | Not recorded | Not recorded |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.175 A | 0.175 A |
Voltage Pentode
The database records E95F as a possible replacement for6096.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode |
| Construction | Pentode | Pentode |
| Base | Not recorded | Not recorded |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.175 A | 0.175 A |
Voltage Pentode - Sharp Cutoff (single)
The database records EF95 as a possible replacement for6096.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | Not recorded | 7BD |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.175 A | 0.175 A |
Voltage Pentode
The database records M8100 as a possible replacement for6096.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode |
| Construction | Pentode | Pentode |
| Base | Not recorded | Not recorded |
| Socket | B7G | Not recorded |
| Base pins | 7 | Not recorded |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.175 A | 0.175 A |
Where 6096 can be used as the replacement
In these recorded relationships, 6096 is the replacement tube. The listed original tubes are not automatically suitable as replacements for 6096.
Voltage Pentode - Sharp Cutoff (single)
The database records 6096 as a possible replacement for5654.
No special restrictions are recorded for this substitution.
| Specification | 6096 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | Not recorded | E7-1 |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.175 A | 0.175 A |
Voltage Pentode - Sharp Cutoff (single)
The database records 6096 as a possible replacement for6AK5.
No special restrictions are recorded for this substitution.
| Specification | 6096 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | Not recorded | 7BD |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.175 A | 0.175 A |
Verify before substituting
Matching a base or heater voltage is not enough to prove that two tubes are interchangeable. Check pin connections, heater current, maximum ratings, bias requirements, warm-up behavior, and the equipment manufacturer’s service documentation before making a substitution.
View the complete 6096 specifications →