Electronic tube type
Rectifier - Full Wave vacuum tubes
Rectifier - Full Wave records in Tube Tinker cover 341 tube designations, including 1,249 preserved original datasheets. Compare bases, sockets, heater requirements, construction, exact variations, and directional replacement options.
- Tube records
- 341
- Original datasheets
- 1,249
- Variation families
- 21
- Tubes with alternatives
- 118
About Rectifier - Full Wave tubes
This applies if the tube is described as a full wave rectifier. It must not be a diode tube but a power rectifier. It must have two rectifier sections.
Electrical range
- Nominal heater voltage
- 1–117 V
- Nominal heater current
- 0.075–70 A
Common rectifier - full wave characteristics
These are the most frequently recorded attributes among tubes in this category.
Bases
- 5T18
- 6S7
- 7O6
- 5L5
- 4C4
- 4R4
- 5AB4
- 5BS4
Sockets
- IO102
- B7G20
- UX416
- B413
- B9A13
- A6
- OCTAL55
- P8A5
Constructions
- Rectifier-Rectifier323
- Rectifier11
- Rectifier-Rectifier-Rectifier3
- Pentode-Rectifier2
- Diode-Diode1
- Diode-Diode-Diode-Diode1
Rectifier - Full Wave tube list
Page 6 of 8
CY2 Rectifier-Rectifier
Indirectly heated full-wave rectifier for AC/DC equipment, electrically equivalent in operating characteristics to UR3C apart from mechanical details. Its series-heater construction supports approximately 120 mA DC output.
- Base
- Not recorded
- Socket
- P8A
- Heater
- 30 V
- Sections
- 2
DC150 Rectifier-Rectifier
Philips directly heated high-vacuum full-wave rectifier for high-voltage power supplies. Rated for approximately 2.8 kV peak inverse voltage and 75 mA rectified DC output from a 22 V filament.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 22 V
- Sections
- 2
DC160 Rectifier-Rectifier
Philips directly heated high-vacuum full-wave rectifier for high-voltage power supplies. Rated for approximately 2.8 kV peak inverse voltage and 75 mA rectified DC output from a heavy 22 V filament.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 22 V
- Sections
- 2
DC2200 Rectifier-Rectifier
Philips directly heated high-vacuum full-wave rectifier for power supplies. Its 40 V filament construction provides approximately 100 mA rectified DC output, with transformer and operating conditions defined by the manufacturer.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 40 V
- Sections
- 2
DE2200 Rectifier-Rectifier
Philips indirectly heated full-wave high-vacuum rectifier for high-voltage power supplies. Rated for approximately 5.7 kV peak inverse voltage and 100 mA DC output per documented rectifier section.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 4 V
- Sections
- 2
DW4350 Rectifier-Rectifier
Directly heated full-wave rectifier for AC power supplies. Operating from a 4 V filament, it provides approximately 120 mA rectified DC output for receiving and related electronic equipment.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 4 V
- Sections
- 2
E90Z Rectifier-Rectifier
Long-life ruggedized full-wave rectifier for reliable power-supply service. Rated for approximately 1.25 kV peak inverse voltage and 210 mA peak current, with construction intended for extended operating life.
- Base
- Not recorded
- Socket
- B7G
- Heater
- 6.3 V
- Sections
- 2
EL1C Rectifier-Rectifier
Directly heated full-wave xenon rectifier using tantalum anodes for high-current supplies. Rated for approximately 725 V peak inverse voltage, 1 A DC output, and 4 A peak current with a low arc drop.
- Base
- A4-10
- Socket
- UX4
- Heater
- 2.5 V
- Sections
- 2
EL3C Rectifier-Rectifier
Directly heated full-wave xenon rectifier with tantalum anodes for high-current power conversion. Rated for approximately 725 V peak inverse voltage, 2.5 A DC output, and 10 A peak current.
- Base
- A4-81
- Socket
- A
- Heater
- 2.5 V
- Sections
- 2
EL3CF Rectifier-Rectifier
Xenon-filled full-wave power rectifier with tantalum-anode construction. Rated for approximately 725 V peak inverse voltage and 2.5 A DC output for substantial power-supply loads.
- Base
- Not recorded
- Socket
- A
- Heater
- 2.5 V
- Sections
- 2
EL3CL Rectifier-Rectifier
Xenon-filled full-wave power rectifier using tantalum-anode construction. Rated for approximately 725 V peak inverse voltage and 2.5 A DC output for high-current rectifier service.
- Base
- Not recorded
- Socket
- LUG4
- Heater
- 2.5 V
- Sections
- 2
EL6C Rectifier-Rectifier
High-current directly heated full-wave xenon rectifier using tantalum anodes. Rated for approximately 725 V peak inverse voltage, 6.4 A DC output, and 25.6 A peak current with a low arc drop.
- Base
- A4-81
- Socket
- A
- Heater
- 2.5 V
- Sections
- 2
EL6CF Rectifier-Rectifier
High-current xenon-filled full-wave power rectifier with tantalum-anode construction. Rated for approximately 725 V peak inverse voltage and 6.4 A DC output for substantial power-conversion applications.
- Base
- Not recorded
- Socket
- A
- Heater
- 2.5 V
- Sections
- 2
EYY13 Rectifier-Rectifier
Indirectly heated dual rectifier diode for full-wave power supplies. Rated for approximately 1 kV peak inverse voltage and 250 mA nominal rectified output from a conventional 6.3 V heater.
- Base
- Not recorded
- Socket
- Y8A
- Heater
- 6.3 V
- Sections
- 2
EZ11 Rectifier-Rectifier
Indirectly heated full-wave rectifier designed primarily for automobile-radio power supplies. Its 6.3 V heater construction supports approximately 60 mA DC output in documented receiver operating conditions.
- Base
- Not recorded
- Socket
- Y8A
- Heater
- 6.3 V
- Sections
- 2
EZ12 Rectifier-Rectifier
Indirectly heated full-wave rectifier for mains-powered electronic equipment. Its 6.3 V heater construction supports transformer-dependent DC output up to approximately 125 mA in documented operating conditions.
- Base
- Not recorded
- Socket
- Y8A
- Heater
- 6.3 V
- Sections
- 2
EZ150 Rectifier-Rectifier
Telefunken indirectly heated high-current full-wave rectifier with separate cathodes. Its heavy 6.3 V heater supports roughly half-ampere-class DC output for substantial amplifier, transmitter, and industrial electronic supplies.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 2
EZ2 Rectifier-Rectifier
Indirectly heated full-wave rectifier for conventional electronic power supplies. Its 6.3 V heater-cathode construction provides moderate-current DC output for receiver, amplifier, and similar equipment.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 2
EZ3 Rectifier-Rectifier
High-vacuum full-wave rectifier for conventional electronic power supplies. Its 6.3 V filament and dual rectifier sections provide standard AC-to-DC conversion in receiver and amplifier equipment.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 2
EZ35 Rectifier-Rectifier
Indirectly heated full-wave power rectifier for conventional electronic DC supplies. Its 6.3 V heater and moderate output capability suit receiver and amplifier power-supply applications.
- Base
- Not recorded
- Socket
- IO
- Heater
- 6.3 V
- Sections
- 2
EZ4 Rectifier-Rectifier
Indirectly heated full-wave rectifier for higher-current electronic power supplies. Its 6.3 V heater-cathode construction provides substantially greater output than smaller EZ-family rectifiers.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 2
EZ40 Rectifier-Rectifier
Indirectly heated full-wave rectifier for AC mains-operated equipment, electrically related to the EZ80 apart from base and dimensions. Its 6.3 V heater supports moderate receiver power supplies.
- Base
- Not recorded
- Socket
- B8A
- Heater
- 6.3 V
- Sections
- 2
EZ41 Rectifier-Rectifier
Indirectly heated full-wave rectifier designed primarily for automobile-radio receivers. Its 6.3 V heater-cathode construction provides moderate DC output for compact vehicular power supplies.
- Base
- Not recorded
- Socket
- B8A
- Heater
- 6.3 V
- Sections
- 2
EZ80 Rectifier-Rectifier
Indirectly heated twin-anode full-wave rectifier for capacitor-input receiver power supplies. Its 6.3 V heater and dual rectifier sections provide moderate-current radio and amplifier DC supplies.
- Base
- Not recorded
- Socket
- B9A
- Heater
- 6.3 V
- Sections
- 2
EZ81 Rectifier-Rectifier
Indirectly heated twin-anode full-wave rectifier for higher-current electronic power supplies. Its 6.3 V heater and substantial output capability suit amplifiers and other demanding DC loads.
- Base
- Not recorded
- Socket
- B9A
- Heater
- 6.3 V
- Sections
- 2
EZ90 Rectifier-Rectifier
Ferranti miniature indirectly heated full-wave rectifier for compact electronic power supplies. Its 6.3 V heater-cathode construction provides conventional dual-anode rectification in receiver and amplifier equipment.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 2
FG190 Rectifier-Rectifier
Directly heated gas-filled all-metal full-wave rectifier for low-voltage, high-current power supplies. Its heavy filament and low gas-discharge forward voltage support ampere-class industrial rectification.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 2.5 V
- Sections
- 2
FW4500 Rectifier-Rectifier
Directly heated full-wave power rectifier for substantial DC supplies. Its four-volt filament and high inverse-voltage capability support receiver, amplifier, and general high-voltage electronic power systems.
- Base
- British4Pin
- Socket
- B4
- Heater
- 4 V
- Sections
- 2
FW4800 Rectifier-Rectifier
Directly heated full-wave power rectifier for higher-voltage DC supplies. Its four-volt filament and substantial inverse-voltage capability suit amplifier and other high-voltage electronic power supplies.
- Base
- British4Pin
- Socket
- B4
- Heater
- 4 V
- Sections
- 2
FZ1 Rectifier-Rectifier
Indirectly heated full-wave rectifier for conventional electronic power supplies. Its 13 V heater-cathode construction provides modest DC output for receiver and similar equipment.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 13 V
- Sections
- 2
G280 Rectifier-Rectifier
G280 rectifier - full wave electronic tube specifications and datasheets.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6 V
- Sections
- 2
GG10115 Rectifier
Russian xenon-filled gas rectifier; documented anode current 0.1 A and reverse voltage 1.5 kV.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
GG1038 Rectifier
Russian argon-filled gas rectifier; documented anode current 0.3 A and reverse voltage 8 kV.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
GG10520 Rectifier
Russian argon-filled gas rectifier; documented anode current 0.5 A and reverse voltage 20 kV.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
GG10530 Rectifier
Russian argon-filled gas rectifier; documented anode current 0.5 A and reverse voltage 30 kV.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
GG1055 Rectifier
Russian inert gas-filled gas rectifier; documented anode current 0.5 A and reverse voltage 5 kV.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 2.5 V
- Sections
- 1
GG1122 Rectifier
Russian argon-filled gas rectifier; documented anode current 1 A and reverse voltage 22 kV.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
GG1216 Rectifier
Russian argon-filled gas rectifier; documented anode current 2 A and reverse voltage 16 kV.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
GG125 Rectifier
Russian xenon-filled gas rectifier; documented anode current 2 A and reverse voltage 5 kV.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
GGR1157 Rectifier
Russian argon-mercury-filled gas rectifier; documented anode current 1.5 A and reverse voltage 7 kV.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 2.5 V
- Sections
- 1
GH1S Rectifier
Russian cold-cathode helium-filled gas rectifier; documented anode current 0.35 A and reverse voltage 5.5 kV.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
GH2K Rectifier
Russian cold-cathode gas-filled gas rectifier; documented anode current 0.45 A and reverse voltage 5 kV.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
GZ30 Rectifier-Rectifier
Indirectly heated full-wave rectifier for conventional electronic power supplies. Its five-volt heater-cathode construction provides moderate-current output for receiver and amplifier applications.
- Base
- Not recorded
- Socket
- IO
- Heater
- 5 V
- Sections
- 2
GZ32 Rectifier-Rectifier
Indirectly heated twin-anode full-wave rectifier for capacitor-input power supplies. Its five-volt heater and substantial current capability suit amplifiers and other demanding electronic DC supplies.
- Base
- Not recorded
- Socket
- IO
- Heater
- 5 V
- Sections
- 2
GZ33 Rectifier-Rectifier
Indirectly heated full-wave rectifier for high-current electronic power supplies. Its heavy five-volt heater supports substantial DC output in amplifier and professional equipment.
- Base
- Not recorded
- Socket
- IO
- Heater
- 5 V
- Sections
- 2
GZ34 Rectifier-Rectifier
Indirectly heated twin-anode full-wave rectifier for capacitor- or choke-input supplies. Its five-volt heater, substantial current capability, and low forward drop suit demanding amplifier power supplies.
- Base
- Octal
- Socket
- IO
- Heater
- 5 V
- Sections
- 2
GZ34_MULLARD Rectifier-Rectifier
GZ34_MULLARD rectifier - full wave electronic tube specifications and datasheets.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 5 V
- Sections
- 2
GZ34S Rectifier-Rectifier
GZ34-type double-anode full-wave rectifier for substantial power-supply loads. Its five-volt heater and strong peak-current capability suit amplifier and professional electronic supplies.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 5 V
- Sections
- 2
