Data set 01
1953 RFT Rundfunk Technik
Published operating points and test conditions from this source.
SECTION 1
Rectifier
Other
Transformer voltage maximum
2x250 V
FullWave
DC output current maximum
60 mA
Rectifier - Full Wave ·Rectifier-Rectifier
EZ11
Indirectly heated full-wave rectifier designed primarily for automobile-radio power supplies. Its 6.3 V heater construction supports approximately 60 mA DC output in documented receiver operating conditions.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 2
- Base
- -
- Socket code
- Y8A
- Base pins
- -
- Nominal heater
- 6.3 V / 290 mA
Description
Indirectly heated full-wave rectifier for automobile receivers, rated for about 60 mA DC output.
Socket description
Steel-tube 8-contact
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- Y8A
- Base pins
- -
- Nominal heater voltage
- 6.3 V
- Nominal heater current
- 290 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
2 physical sections, each with unique specifications.
Section 1
Rectifier
X-ray radiationInterelectrode capacitances
- Rectifier peak inverse voltage
- 500 V
- Rectifier nominal output current
- 60 mA
- Rectifier peak forward current
- 360 mA
- Rectifier max heater-cathode voltage
- 350 V
Representative promoted row for repeated identical sections.
Section 2
Rectifier
X-ray radiationInterelectrode capacitances
- Rectifier peak inverse voltage
- 500 V
- Rectifier nominal output current
- 60 mA
- Rectifier peak forward current
- 360 mA
- Rectifier max heater-cathode voltage
- 350 V
Physical rectifier section 2; identical section values duplicated per physical-section policy.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 02
1959 Telefunken
Published operating points and test conditions from this source.
SECTION 1
Rectifier
Other
RMS transformer voltage per plate
250 V
2x250V
DC output current maximum
60 mA
Heater-to-cathode voltage maximum
350 V
Minimum transformer internal resistance per anode
600 Ohm
Reservoir capacitance maximum
32 uF
Reservoir capacitance
16 uF
Curves