Specialized tube type
Specialized - Klystron vacuum tubes
Specialized - Klystron records in Tube Tinker cover 382 tube designations, including 569 preserved original datasheets. Compare bases, sockets, heater requirements, construction, exact variations, and directional replacement options.
- Tube records
- 382
- Original datasheets
- 569
- Variation families
- 5
- Tubes with alternatives
- 1
About Specialized - Klystron tubes
If the tube is described as a klystron then apply this type.
Electrical range
- Nominal heater voltage
- 3–26 V
- Nominal heater current
- 0.25–110 A
Common specialized - klystron characteristics
These are the most frequently recorded attributes among tubes in this category.
Bases
- Peewee 4 pin4
- B8-212
- OCTAL2
- R1
- Special microwave base1
Sockets
- IO38
- B7G15
- PEEWEE36
- B9A4
- B13B3
- B8G2
- OCTAL61
- OCTAL71
Constructions
- Klystron382
Specialized - Klystron tube list
Page 8 of 8
VA6315 Klystron
Varian manufacturer designation for a reflex klystron oscillator, explicitly printed as an alias or co-designation on the corresponding JEDEC-family datasheet.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
VA92C Klystron
Varian manufacturer designation for a reflex klystron oscillator, explicitly printed as an alias or co-designation on the corresponding JEDEC-family datasheet.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
VA97 Klystron
Low-power reflex klystron oscillator covering approximately 34.0–35.6 GHz for microwave measurement and communications equipment.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
VLR222 Klystron
Reflex klystron microwave oscillator designed for approximately 10.7–11.7 GHz service.
- Base
- Not recorded
- Socket
- IO
- Heater
- Not recorded
- Sections
- 1
X1075 Klystron
Ceramic-metal conduction-cooled reflex klystron for rugged local-oscillator service over 8.5–9.6 GHz under severe shock, vibration, and temperature extremes.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
X1075A Klystron
Ceramic-metal conduction-cooled reflex klystron delivering roughly 100–200 mW over 8.5–9.6 GHz for rugged local-oscillator service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
X1095 Klystron
Factory-preset reflex klystron operating between approximately 5.9 and 6.7 GHz, with about 400 mW output and 100 MHz electronic tuning bandwidth.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
X1111 Klystron
Conduction-cooled two-cavity microwave klystron operating near 13.34 GHz and providing at least two watts output.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
X1113 Klystron
Two-cavity microwave klystron intended for operation near 35 GHz, providing at least two watts output with blower or conduction cooling.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
X1115 Klystron
Ceramic-metal reflex klystron covering 12.2–12.7 GHz with waveguide output and conduction or convection cooling.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
X1115A Klystron
Conduction-cooled reflex klystron for transmitter/local-oscillator and parametric-amplifier pump service over 12.2–12.7 GHz.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
X1115B Klystron
Low-noise conduction-cooled reflex klystron designed for local-oscillator service over 12.2–12.7 GHz.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
X1116 Klystron
Ceramic-metal reflex klystron covering 11.7–12.2 GHz with waveguide output and conduction or convection cooling.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
X1116A Klystron
Conduction-cooled reflex klystron for transmitter/local-oscillator and parametric-amplifier pump service over 11.7–12.2 GHz.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
X1116B Klystron
Ceramic-metal reflex klystron covering 11.7–12.2 GHz with conduction or convection cooling.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
X1117 Klystron
Ceramic-metal reflex klystron covering 11.2–11.7 GHz with waveguide output and conduction or convection cooling.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
X1117A Klystron
Ceramic-metal reflex klystron covering 11.2–11.7 GHz with conduction or convection cooling.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
X1117B Klystron
Ceramic-metal reflex klystron covering 11.2–11.7 GHz with conduction or convection cooling.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
X1118 Klystron
Ceramic-metal reflex klystron covering 10.7–11.2 GHz with waveguide output and conduction or convection cooling.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
X1118A Klystron
Ceramic-metal reflex klystron covering 10.7–11.2 GHz with conduction or convection cooling.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
X1118B Klystron
Ceramic-metal reflex klystron covering 10.7–11.2 GHz with conduction or convection cooling.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
X1120 Klystron
Preset or trimmable Ku-band reflex klystron covering approximately 12.5–15 GHz.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
X1123 Klystron
Fixed-frequency or trimmable reflex klystron centered near 13.395 GHz.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
X1126 Klystron
Reflex klystron covering approximately 16.0–17.0 GHz.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
X1126B Klystron
Reflex klystron covering approximately 16.5–17.2 GHz.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
X1130 Klystron
Preset Ku-band reflex klystron covering approximately 15–18 GHz.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
X3002 Klystron
Three-cavity magnetically focused L-band pulse-amplifier klystron for high-power pulsed microwave service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
X3054 Klystron
Five-cavity air-cooled C-band continuous-wave power-amplifier klystron.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
X3065 Klystron
Conduction-cooled electrostatically focused S-band power-amplifier klystron.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
X3065A Klystron
Air-cooled electrostatically focused S-band power-amplifier klystron.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
X626AC Klystron
Three-cavity high-average-power L-band pulse-amplifier klystron.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
X700 Klystron
Rugged four-cavity S-band pulse-amplifier klystron designed for high-power pulsed microwave service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
X780 Klystron
High-power L-band pulse-amplifier klystron designed for pulsed microwave power service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
X841D Klystron
Broadband high-average-power pulse-amplifier klystron designed for high-power pulsed microwave service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
X850 Klystron
High-power Eimac X-band/SHF klystron designed for radar astronomy, precision tracking, and space-communications microwave transmission.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
YK1046 Klystron
Mullard X-band reflex klystron with integral tuning cavity, intended primarily as a stable microwave local oscillator.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
Z15350Z Klystron
Four-cavity UHF power klystron covering 470–598 MHz, designed as the final vision or sound amplifier in television transmitters and transposers.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 5 V
- Sections
- 1
Z16350Z Klystron
Four-cavity UHF power klystron covering 598–710 MHz, designed for final vision and sound amplification in television broadcast transmitters and transposers.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 5 V
- Sections
- 1
Z17350Z Klystron
Four-cavity UHF power klystron covering 710–854 MHz, intended as the final amplifier in UHF television vision, sound, and transposer service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 5 V
- Sections
- 1
Z2391G Klystron
Reflex klystron developed as a frequency-modulated microwave transmitter covering approximately 3.6–4.2 GHz and producing about one watt output.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
ZM6600 Klystron
Water-cooled X-band multiple-beam klystron for long-range radar and high-power communications, rated for approximately 40 kW continuous-wave output.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 9 V
- Sections
- 1
ZM6601 Klystron
Water-cooled X-band multiple-beam klystron for long-range radar and high-power communications, rated for approximately 50 kW continuous-wave output.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 9 V
- Sections
- 1
ZM6602 Klystron
Water-cooled X-band multiple-beam klystron for long-range radar and high-power communications, rated for approximately 100 kW continuous-wave output.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 9 V
- Sections
- 1
ZV1009 Klystron
Rugged ceramic reflex klystron for CW, FM, or pulse operation from approximately 1.5–6.0 GHz in signal generators, spectrum analyzers, and receiver local oscillators.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
ZV1009X Klystron
Higher-power rugged ceramic reflex klystron covering approximately 1.7–5.0 GHz for CW, FM, or pulse service, including master-oscillator and driver applications.
- Base
- Peewee 4 pin
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
ZV1011 Klystron
Rugged ceramic-metal reflex klystron covering approximately 4–11 GHz for CW, FM, or pulse operation in signal generators, analyzers, and receiver local oscillators.
- Base
- Peewee 4 pin
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
