X1130

Preset Ku-band reflex klystron covering approximately 15–18 GHz.

Directly heatedCold cathodeCommon cathodeDissimilarSpecialized

Sections: 1
Base: -
Socket code: -
Base pins: -
Nominal heater: 6.3 V / 1.23 A

Description

Preset Ku-band reflex klystron covering 15–18 GHz; published sheet provides typical performance.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base: -
Socket code: -
Base pins: -
Nominal heater voltage: 6.3 V
Nominal heater current: 1.23 A
Parallel heater voltage: -
Parallel heater current: -
Series capable: No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Klystron

X-ray radiationInterelectrode capacitances

No fixed ratings are recorded for this section.

Microwave-device ratings have no dedicated promoted voltage/dissipation columns in this schema; applicable maximum cathode current is promoted and specialized published ratings are preserved in TUBE_SECTION_PARAMETER.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1962 Eimac

Published operating points and test conditions from this source.

SECTION 1

Klystron

Characteristic

Frequency Range
15 to 18
3 dB Bandwidth
35 MHz
Modulation Sensitivity
0.7 MHz/V
Temperature Coefficient
150 kHz/C

Other

Typical Resonator Voltage
300 V
Typical Output Power
250 mW
Typical Cathode Current
52 mA
Typical Repeller Voltage
-300 V
Load VSWR Maximum
1.2 ratio