Skip to main content

Specialized - Klystron ·Klystron

X1095

Factory-preset reflex klystron operating between approximately 5.9 and 6.7 GHz, with about 400 mW output and 100 MHz electronic tuning bandwidth.

Directly heatedCold cathodeCommon cathodeDissimilarSpecialized
Sections
1
Base
-
Socket code
-
Base pins
-
Nominal heater
6.3 V / 700 mA

Description

The Eimac X-1095 is a reflex klystron factory preset between 5.9 and 6.7 GHz, with about 400 mW output and 100-MHz electronic tuning bandwidth.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
-
Socket code
-
Base pins
-
Nominal heater voltage
6.3 V
Nominal heater current
700 mA
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Klystron

X-ray radiationInterelectrode capacitances
Max cathode current
60 mA

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1962 Eimac

Published operating points and test conditions from this source.

SECTION 1

Klystron

Characteristic

  • Frequency Range

    5900 to 6700 MHz

  • Power Output

    400 mW

    typical

  • Warm-up Time

    30 s

  • Electronic Tuning Range

    100 MHz

Other

  • Maximum DC Resonator Voltage

    1700 V

  • Maximum Negative Repeller Voltage

    500 V

  • Typical Resonator Voltage

    600 V