Skip to main content
Tube Tinker — Electron Tube Database
Alternatives & variationsDownload PDF datasheet

Specialized - Klystron ·Klystron

ZV1011

Rugged ceramic-metal reflex klystron covering approximately 4–11 GHz for CW, FM, or pulse operation in signal generators, analyzers, and receiver local oscillators.

Directly heatedCold cathodeCommon cathodeDissimilarSpecialized
Sections
1
Base
Peewee 4 pin
Socket code
-
Base pins
4
Nominal heater
6.3 V / 680 mA

Description

Rugged ceramic-and-metal reflex klystron for CW, FM, or pulse operation in an external cavity, covering approximately 4.0 to 11.0 GHz; intended for microwave signal generators, sources, spectrum analyzers, and receiver local oscillators. Explicit co-designation of 8052 printed in the approved source.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
Peewee 4 pin
Socket code
-
Base pins
4
Nominal heater voltage
6.3 V
Nominal heater current
680 mA
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Peewee 4 pin - Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Klystron

X-ray radiationInterelectrode capacitances

No fixed ratings are recorded for this section.

Reflex-klystron section; dedicated Klystron SectionType is not present in the canonical section vocabulary.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1962 Polarad

Published operating points and test conditions from this source.

SECTION 1

Klystron

Other

  • Heater voltage

    6.3 V

    AC or DC

  • Heater current

    680 mA

  • Maximum resonator voltage

    1250 V

  • Maximum resonator current

    22 mA

  • Reflector voltage range

    -800 to -35 V

  • Control electrode voltage range

    +20 to -150 V

  • Maximum control electrode current

    6 mA

  • Maximum heater-cathode voltage

    45 V

  • Maximum power input

    28 W

  • Maximum seal temperature

    250 degC

Data set 02

1999 Philips 0-D

Published operating points and test conditions from this source.

SECTION 1

Klystron

Other

  • Frequency range

    4.0–11.0 GHz

    Published datasheet value

  • Maximum resonator voltage

    - to 1250 V

    Published datasheet value

  • Maximum resonator current

    - to 22 mA

    Published datasheet value

  • Maximum power input

    - to 28 W

    Published datasheet value

  • Maximum seal temperature

    - to 250 °C

    Published datasheet value

  • Maximum heater-cathode voltage

    - to 45 V

    Published datasheet value

  • Reflector voltage range

    -800 to -35 V

    Published datasheet value

  • Maximum control-electrode current

    - to 6 mA

    Published datasheet value