Tube cross-reference
EF95 alternatives, equivalents, and replacements
Review exact electrical variations and directional substitutions recorded for the EF95 voltage pentode - sharp cutoff (single). Compare core specifications and verify every restriction before using a replacement.
Replacement tubes for EF95
The following tubes are recorded as possible replacements for EF95. This direction does not establish that EF95 can replace them.
Voltage Pentode - Sharp Cutoff (single)
The database records 6AK5 as a possible replacement forEF95.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 7BD | 7BD |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.175 A | 0.175 A |
Where EF95 can be used as the replacement
In these recorded relationships, EF95 is the replacement tube. The listed original tubes are not automatically suitable as replacements for EF95.
Voltage Pentode - High Frequency (single)
The database records EF95 as a possible replacement for5591.
No special restrictions are recorded for this substitution.
| Specification | EF95 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - High Frequency (single) |
| Construction | Pentode | Pentode |
| Base | 7BD | E7-1 |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.175 A | 0.15 A |
Voltage - Dual Triode (similar)
The database records EF95 as a possible replacement for5608.
No special restrictions are recorded for this substitution.
| Specification | EF95 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage - Dual Triode (similar) |
| Construction | Pentode | Triode-Triode |
| Base | 7BD | Not recorded |
| Socket | B7G | B9A |
| Base pins | 7 | Not recorded |
| Sections | 1 | 2 |
| Heater voltage | 6.3 V | 2.5 V |
| Heater current | 0.175 A | 2 A |
Voltage Pentode - Sharp Cutoff (single)
The database records EF95 as a possible replacement for5654.
No special restrictions are recorded for this substitution.
| Specification | EF95 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 7BD | E7-1 |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.175 A | 0.175 A |
Voltage Pentode - Sharp Cutoff (single)
The database records EF95 as a possible replacement for6096.
No special restrictions are recorded for this substitution.
| Specification | EF95 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 7BD | Not recorded |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.175 A | 0.175 A |
Voltage Pentode - Sharp Cutoff (single)
The database records EF95 as a possible replacement for6AK5.
- Not suitable for all circuits
| Specification | EF95 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 7BD | 7BD |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.175 A | 0.175 A |
Verify before substituting
Matching a base or heater voltage is not enough to prove that two tubes are interchangeable. Check pin connections, heater current, maximum ratings, bias requirements, warm-up behavior, and the equipment manufacturer’s service documentation before making a substitution.
View the complete EF95 specifications →