Electronic tube type
Rectifier - TV Line Scan Boost vacuum tubes
Rectifier - TV Line Scan Boost records in Tube Tinker cover 128 tube designations, including 462 preserved original datasheets. Compare bases, sockets, heater requirements, construction, exact variations, and directional replacement options.
- Tube records
- 128
- Original datasheets
- 462
- Variation families
- 19
- Tubes with alternatives
- 65
About Rectifier - TV Line Scan Boost tubes
This type is applied if the tube is described as the high voltage rectifier for television sets. It should also have an emits xray warning.
Electrical range
- Nominal heater voltage
- 0.625–6.3 V
- Nominal heater current
- 0.03–5 A
Common rectifier - tv line scan boost characteristics
These are the most frequently recorded attributes among tubes in this category.
Bases
- 3C8
- 9Y5
- NOVAL3
- 12FV2
- 12JB2
- 6X22
- 8EZ2
- 8MT2
Sockets
- B9A36
- IO27
- B12C6
- B7G6
- OCTAL73
- DUOPIN22
- OCTAL62
- B8D1
Constructions
- Rectifier128
Rectifier - TV Line Scan Boost tube list
Page 1 of 3
1AD2 Rectifier
Filamentary high-voltage television flyback rectifier for generating CRT accelerating voltage from horizontal-output transformer pulses, using a low-power filament suitable for operation at elevated potential.
- Base
- Not recorded
- Socket
- B7G
- Heater
- 1.25 V
- Sections
- 1
1AD2A Rectifier
High-voltage television flyback/EHT rectifier designed to convert horizontal-output transformer pulses into the DC accelerating supply required by the CRT.
- Base
- Not recorded
- Socket
- B12C
- Heater
- 1.25 V
- Sections
- 1
1AJ2 Rectifier
High-voltage television flyback/EHT rectifier designed to convert horizontal-output transformer pulses into the DC accelerating supply required by the CRT.
- Base
- 12EL
- Socket
- Not recorded
- Heater
- 1.25 V
- Sections
- 1
1AU3 Rectifier
High-voltage television flyback/EHT rectifier designed to convert horizontal-output transformer pulses into the DC accelerating supply required by the CRT.
- Base
- 3C
- Socket
- OCTAL7
- Heater
- 1.25 V
- Sections
- 1
1AX2 Rectifier
High-voltage television flyback/EHT rectifier designed to convert horizontal-output transformer pulses into the DC accelerating supply required by the CRT.
- Base
- 9Y
- Socket
- Not recorded
- Heater
- 1.4 V
- Sections
- 1
1AY2 Rectifier
High-voltage television flyback/EHT rectifier designed to convert horizontal-output transformer pulses into the DC accelerating supply required by the CRT.
- Base
- Not recorded
- Socket
- DUOPIN2
- Heater
- 1.25 V
- Sections
- 1
1AY2A Rectifier
Shielded filamentary television flyback/EHT rectifier that converts horizontal-output pulses into CRT accelerating voltage while incorporating measures to reduce X-radiation during high-voltage operation.
- Base
- Not recorded
- Socket
- DUOPIN2
- Heater
- 1.25 V
- Sections
- 1
1B3GT Rectifier
High-voltage television flyback/EHT rectifier designed to convert horizontal-output transformer pulses into the DC accelerating supply required by the CRT.
- Base
- 3C
- Socket
- IO
- Heater
- 1.25 V
- Sections
- 1
1BC2 Rectifier
High-voltage pulse rectifier for black-and-white television receivers.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 1.25 V
- Sections
- 1
1BC2A Rectifier
High-voltage television flyback/EHT rectifier designed to convert horizontal-output transformer pulses into the DC accelerating supply required by the CRT.
- Base
- Not recorded
- Socket
- B9A
- Heater
- 1.25 V
- Sections
- 1
1BC2B Rectifier
Shielded filamentary television flyback/EHT rectifier designed to generate CRT accelerating voltage from horizontal-output pulses, with built-in X-radiation shielding for high-voltage operation.
- Base
- Not recorded
- Socket
- B9A
- Heater
- 1.25 V
- Sections
- 1
1BG2 Rectifier
High-voltage television flyback/EHT rectifier designed to convert horizontal-output transformer pulses into the DC accelerating supply required by the CRT.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 1.4 V
- Sections
- 1
1BH2 Rectifier
1BH2 is a directly heated half-wave high-voltage flyback rectifier for television CRT anode supplies. It uses a 1.25 V, 0.2 A filament, 9RG basing with solder lugs and a top-cap anode, and is rated for 18 kV peak inverse voltage in pulsed service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 1.25 V
- Sections
- 1
1BQ2 Rectifier
High-voltage television flyback/EHT rectifier designed to convert horizontal-output transformer pulses into the DC accelerating supply required by the CRT.
- Base
- E91
- Socket
- Not recorded
- Heater
- 1.4 V
- Sections
- 1
1BY2 Rectifier
High-voltage color television pulse rectifier with X-ray precautions.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 1.25 V
- Sections
- 1
1BY2A Rectifier
Compactron filamentary television flyback/EHT rectifier that generates CRT accelerating voltage from horizontal-output pulses and incorporates X-radiation shielding for safer high-voltage operation.
- Base
- 12HZ
- Socket
- B12C
- Heater
- 1.25 V
- Sections
- 1
1C11P Rectifier
Russian filamentary high-voltage rectifier specifically designed to rectify television line-scan flyback pulses into the CRT accelerating-voltage supply.
- Base
- Not recorded
- Socket
- B7G
- Heater
- 1.2 V
- Sections
- 1
1C20B Rectifier
Russian subminiature high-voltage rectifier specifically intended to convert television line-flyback pulses into DC for the CRT high-voltage supply.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 1.1 V
- Sections
- 1
1C21P Rectifier
Russian high-voltage rectifier for television line-scanning circuits, rectifying horizontal flyback pulses to generate the CRT accelerating-voltage supply.
- Base
- Not recorded
- Socket
- B9A
- Heater
- 1.4 V
- Sections
- 1
1DG3A Rectifier
Shielded filamentary television flyback/EHT rectifier that generates CRT accelerating voltage from horizontal-output pulses and incorporates shielding to reduce X-radiation.
- Base
- 8ND
- Socket
- IO
- Heater
- 1.25 V
- Sections
- 1
1G3GT Rectifier
High-voltage television flyback/EHT rectifier designed to convert horizontal-output transformer pulses into the DC accelerating supply required by the CRT.
- Base
- Not recorded
- Socket
- IO
- Heater
- 1.25 V
- Sections
- 1
1G3GTA Rectifier
Shielded filamentary high-voltage television flyback rectifier for CRT accelerating supplies, incorporating X-radiation shielding for operation at elevated EHT potentials.
- Base
- 3C
- Socket
- IO
- Heater
- 1.25 V
- Sections
- 1
1H2 Rectifier
High-voltage television flyback/EHT rectifier designed to convert horizontal-output transformer pulses into the DC accelerating supply required by the CRT.
- Base
- 9LX
- Socket
- B9A
- Heater
- 1.4 V
- Sections
- 1
1J3 Rectifier
High-voltage television flyback/EHT rectifier designed to convert horizontal-output transformer pulses into the DC accelerating supply required by the CRT.
- Base
- 3C
- Socket
- IO
- Heater
- 1.25 V
- Sections
- 1
1J3A Rectifier
High-voltage half-wave rectifier for cathode-ray-tube anode supplies, belonging to the television flyback/EHT rectifier family used to generate CRT accelerating voltage.
- Base
- Not recorded
- Socket
- B7G
- Heater
- Not recorded
- Sections
- 1
1K3 Rectifier
High-voltage television flyback/EHT rectifier designed to convert horizontal-output transformer pulses into the DC accelerating supply required by the CRT.
- Base
- 3C
- Socket
- IO
- Heater
- 1.25 V
- Sections
- 1
1K3A Rectifier
Shielded filamentary television flyback/EHT rectifier that converts horizontal-output pulses into CRT accelerating voltage while reducing X-radiation during high-voltage operation.
- Base
- 3C
- Socket
- IO
- Heater
- 1.25 V
- Sections
- 1
1N2 Rectifier
Early filamentary high-voltage rectifier for television receivers, used to rectify flyback pulses and generate the CRT accelerating-voltage supply.
- Base
- 3C
- Socket
- OCTAL7
- Heater
- 1.25 V
- Sections
- 1
1N2A Rectifier
High-voltage television flyback/EHT rectifier designed to convert horizontal-output transformer pulses into the DC accelerating supply required by the CRT.
- Base
- 3C
- Socket
- OCTAL7
- Heater
- 1.25 V
- Sections
- 1
1S2A Rectifier
High-vacuum single-anode television line-flyback EHT rectifier for generating CRT accelerating voltage from horizontal timebase transformer pulses.
- Base
- E91
- Socket
- B9A
- Heater
- 1.4 V
- Sections
- 1
1T2 Rectifier
Half-wave high-voltage rectifier specifically intended for television flyback supplies, converting horizontal-output pulses into the CRT accelerating-voltage supply.
- Base
- 1T2
- Socket
- Not recorded
- Heater
- 1.4 V
- Sections
- 1
1T2R16 Rectifier
1T2R16 rectifier - tv line scan boost electronic tube specifications and datasheets.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 1.4 V
- Sections
- 1
1TS11P Rectifier
Russian high-voltage rectifier for pulse and television high-voltage conversion, including line-flyback-derived CRT supply service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 1.32 V
- Sections
- 1
1TS7S Rectifier
High-voltage rectifier for high-frequency pulse rectification, particularly scanning circuits. Its very high inverse-voltage capability and low output current emphasize fast pulse service rather than ordinary DC power rectification.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 1.4 V
- Sections
- 1
1V2 Rectifier
Filamentary television flyback/EHT rectifier with exceptionally low filament voltage, designed to rectify horizontal-output pulses into the CRT accelerating supply.
- Base
- QU
- Socket
- B9A
- Heater
- 0.625 V
- Sections
- 1
1X2 Rectifier
Directly heated high-voltage rectifier for television flyback supplies. It rectifies horizontal-output transformer pulses to generate CRT accelerating voltage, using a low-power filament that operates at elevated potential.
- Base
- 9Y
- Socket
- B9A
- Heater
- 1.25 V
- Sections
- 1
1X2A Rectifier
Revised directly heated high-voltage television flyback rectifier for CRT accelerating-voltage supplies. Its low-power filament floats at EHT potential while rectifying horizontal-output transformer pulses.
- Base
- 9Y
- Socket
- B9A
- Heater
- 1.25 V
- Sections
- 1
1X2B Rectifier
Filamentary high-voltage rectifier for television flyback/EHT service. It converts horizontal-output transformer pulses into CRT accelerating voltage with a low-power directly heated filament at elevated potential.
- Base
- 9Y
- Socket
- B9A
- Heater
- 1.25 V
- Sections
- 1
1X2C Rectifier
Later-version filamentary high-voltage rectifier for television flyback/EHT service. It rectifies horizontal-output transformer pulses to produce the CRT accelerating-voltage supply.
- Base
- 9Y
- Socket
- B9A
- Heater
- 1.25 V
- Sections
- 1
1Y2 Rectifier
Directly heated high-voltage half-wave rectifier for very-low-current supplies. Its extremely high inverse-voltage capability and modest filament requirements suit specialized high-voltage electronic equipment.
- Base
- 4P
- Socket
- Not recorded
- Heater
- 1.5 V
- Sections
- 1
1Y32 Rectifier
Directly heated high-voltage half-wave rectifier for television receiver EHT supplies. Its low-power filament supports specialized flyback pulse rectification for CRT accelerating voltage.
- Base
- Not recorded
- Socket
- B7G
- Heater
- 1.4 V
- Sections
- 1
1Y32T Rectifier
Tesla high-voltage rectifier for television flyback/EHT service. It rectifies horizontal line-transformer pulses to generate CRT accelerating voltage with a low-power filament at elevated potential.
- Base
- Not recorded
- Socket
- B7G
- Heater
- 1.4 V
- Sections
- 1
1Z1 Rectifier
Directly heated high-voltage rectifier specifically for television line-flyback pulse rectification. Its unusually low-power filament supports CRT high-voltage generation at very low average current.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 1.4 V
- Sections
- 1
1Z2 Rectifier
High-voltage low-current half-wave vacuum rectifier with a thoriated-tungsten filament. Its compact construction and multi-kilovolt capability suit specialized high-voltage power supplies.
- Base
- 7CB
- Socket
- B9A
- Heater
- 1.25 V
- Sections
- 1
2AH2 Rectifier
Duodecar high-voltage vacuum rectifier for supplying picture-tube anode voltage in television receivers. Its specialized construction supports flyback-derived CRT accelerating-voltage service.
- Base
- 12JB
- Socket
- B12C
- Heater
- 2.5 V
- Sections
- 1
2AS2 Rectifier
Compactron high-voltage rectifier diode for television flyback power supplies. It converts line-output pulses into the high DC voltage required by the picture tube.
- Base
- Not recorded
- Socket
- B9A
- Heater
- 2.5 V
- Sections
- 1
2AS2A Rectifier
Duodecar high-voltage vacuum rectifier for pulse circuits in color television receivers. Its specialized role is flyback-derived picture-tube accelerating-voltage generation.
- Base
- 12EW
- Socket
- B7G
- Heater
- 2.5 V
- Sections
- 1
2AV2 Rectifier
Filamentary high-voltage rectifier for television flyback/EHT service. It rectifies horizontal-output transformer pulses to generate CRT accelerating voltage with a low-power filament at elevated potential.
- Base
- 9
- Socket
- B9A
- Heater
- 1.8 V
- Sections
- 1
