Skip to main content

Rectifier - TV Line Scan Boost ·Rectifier

1N2

Early filamentary high-voltage rectifier for television receivers, used to rectify flyback pulses and generate the CRT accelerating-voltage supply.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
1
Base
3C
Socket code
OCTAL7
Base pins
-
Nominal heater
1.25 V / 200 mA

Description

Filamentary half-wave high-voltage rectifier intended for television receivers and other high-voltage rectifier applications.

Socket description

7-contact octal-family base

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
3C
Socket code
OCTAL7
Base pins
-
Nominal heater voltage
1.25 V
Nominal heater current
200 mA
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

3C - Terminal pinout

Electrical assignments shared by every tube using this base designation.

TerminalSectionConnectionEvidence
PIN1Pin 1—IC

Transcribed directly from EIA chart; independent cross-check not yet performed.

Unverified

EIA Base Connections chart, page 127 (uploaded BaseCodeDataCharts_OCR), base 3C

PIN2Pin 2—F — Filament

Transcribed directly from EIA chart; independent cross-check not yet performed.

Unverified

EIA Base Connections chart, page 127 (uploaded BaseCodeDataCharts_OCR), base 3C

PIN3Pin 3—IC

Transcribed directly from EIA chart; independent cross-check not yet performed.

Unverified

EIA Base Connections chart, page 127 (uploaded BaseCodeDataCharts_OCR), base 3C

PIN5Pin 5—IC

Transcribed directly from EIA chart; independent cross-check not yet performed.

Unverified

EIA Base Connections chart, page 127 (uploaded BaseCodeDataCharts_OCR), base 3C

PIN7Pin 7—F — Filament

Transcribed directly from EIA chart; independent cross-check not yet performed.

Unverified

EIA Base Connections chart, page 127 (uploaded BaseCodeDataCharts_OCR), base 3C

PIN8Pin 8—IC

Transcribed directly from EIA chart; independent cross-check not yet performed.

Unverified

EIA Base Connections chart, page 127 (uploaded BaseCodeDataCharts_OCR), base 3C

CAP1Top capAP — Plate (Anode)

Transcribed directly from EIA chart; independent cross-check not yet performed.

Unverified

EIA Base Connections chart, page 127 (uploaded BaseCodeDataCharts_OCR), base 3C

Section ratings

1 physical section, each with unique specifications.

Section 1

Rectifier

X-ray radiationInterelectrode capacitances
Rectifier peak inverse voltage
28000 V
Rectifier nominal output current
0.5 mA
Rectifier peak forward current
50 mA

Published ratings and characteristics promoted where clearly legible in the approved source.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1944 Hytron

Published operating points and test conditions from this source.

SECTION 1

Rectifier

Other

  • Peak Plate Current

    50 mA

  • Average Plate Current

    0.5 mA

Characteristic

  • Plate To Filament Capacitance

    1 pF