Electronic tube type
Power - Tetrode Single (NOT beam) (under 10W) vacuum tubes
Power - Tetrode Single (NOT beam) (under 10W) records in Tube Tinker cover 9 tube designations, including 19 preserved original datasheets. Compare bases, sockets, heater requirements, construction, exact variations, and directional replacement options.
- Tube records
- 9
- Original datasheets
- 19
- Variation families
- 1
- Tubes with alternatives
- 0
About Power - Tetrode Single (NOT beam) (under 10W) tubes
Tubes of this type must a power tetrode section which takes priority. The max plate watt rating must below 10 watts. Qualification also says that this tube did NOT qualify as "HorizontalSweep" or "VerticalSweep"
Electrical range
- Nominal heater voltage
- 2–6.3 V
- Nominal heater current
- 0.3–1.6 A
Common power - tetrode single (not beam) (under 10w) characteristics
These are the most frequently recorded attributes among tubes in this category.
Sockets
- B9A4
- IO1
- UX41
Constructions
- Tetrode8
- Pentode-Pentode1
Power - Tetrode Single (NOT beam) (under 10W) tube list
Page 1 of 1
418A Tetrode
Indirectly heated power tetrode designed primarily for broadband video and intermediate-frequency amplifier output stages. Its output capability combines substantial load drive with wide frequency response.
- Base
- Not recorded
- Socket
- UX4
- Heater
- 6.3 V
- Sections
- 1
6E5P Tetrode
Russian high-reliability output high-frequency tetrode designed for broadband amplification. Its professional construction emphasizes dependable high-frequency output service in wideband electronic equipment.
- Base
- Not recorded
- Socket
- B9A
- Heater
- 6.3 V
- Sections
- 1
6E5PI Tetrode
6E5PI (6Э5П-И) indirectly heated high-frequency pulse tetrode for RF voltage amplification in pulsed circuits.
- Base
- Not recorded
- Socket
- B9A
- Heater
- 6.3 V
- Sections
- 1
6E6PE Tetrode
6E6PE (6Э6П-Е) long-life high-frequency output tetrode for broadband RF voltage amplification, with a 6.3 V 0.61 A heater.
- Base
- Not recorded
- Socket
- B9A
- Heater
- 6.3 V
- Sections
- 1
6P46S Tetrode
Russian power tetrode documented for electronic amplification, control, or radio-frequency service. Its manufacturer data establish output-capable tetrode operation without a narrower documented application.
- Base
- Not recorded
- Socket
- IO
- Heater
- 5.7 V
- Sections
- 1
QP230 Pentode-Pentode
Matched high-efficiency double pentode designed for quiescent push-pull audio output in battery receivers, reducing standing current while providing useful loudspeaker power.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 2 V
- Sections
- 2
QQV0310 Tetrode
Miniature RF power double tetrode designed for amplifier and oscillator service to approximately 225 MHz. Its twin construction supports compact VHF power circuits.
- Base
- Not recorded
- Socket
- B9A
- Heater
- 6.3 V
- Sections
- 1
QQV0415 Tetrode
VHF power double tetrode designed for RF amplifier and oscillator service to approximately 250 MHz. Its paired sections support compact transmitter output circuits.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
QQZ0415 Tetrode
Quick-heating directly heated double tetrode designed for mobile RF equipment to approximately 186 MHz. Its paired sections and rapid warm-up suit mobile transmitter applications.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1