Electronic tube type
Power - Pentode Single (NOT beam) (under 10W) vacuum tubes
Power - Pentode Single (NOT beam) (under 10W) records in Tube Tinker cover 219 tube designations, including 835 preserved original datasheets. Compare bases, sockets, heater requirements, construction, exact variations, and directional replacement options.
- Tube records
- 219
- Original datasheets
- 835
- Variation families
- 28
- Tubes with alternatives
- 68
About Power - Pentode Single (NOT beam) (under 10W) tubes
Tubes of this type must have a power pentode section which takes priority. The max plate watt rating must below 10 watts. Qualification also says that this tube did NOT qualify as "HorizontalSweep" or "VerticalSweep"
Electrical range
- Nominal heater voltage
- 1.1–60 V
- Nominal heater current
- 0.013–2 A
Common power - pentode single (not beam) (under 10w) characteristics
These are the most frequently recorded attributes among tubes in this category.
Bases
- 7CV8
- 7BA3
- 7S3
- B9A3
- E7-13
- Miniature3
- P353
- Subminiature3
Sockets
- B7G44
- B9A36
- IO21
- P8A15
- B78
- B47
- B54
- B8G4
Constructions
- Pentode217
- Pentode-Pentode2
Power - Pentode Single (NOT beam) (under 10W) tube list
Page 5 of 5
PEN26 Pentode
Power/output pentode designed for audio-frequency output amplification in receiver or push-pull amplifier service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 24 V
- Sections
- 1
PEN3520 Pentode
Power/output pentode designed for audio-frequency output amplification in receiver or push-pull amplifier service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 35 V
- Sections
- 1
PEN4VA Pentode
Power/output pentode designed for audio-frequency output amplification in receiver or push-pull amplifier service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 4 V
- Sections
- 1
PEN4VB Pentode
Power/output pentode designed for audio-frequency output amplification in receiver or push-pull amplifier service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
PENA4 Pentode
Power/output pentode designed for audio-frequency output amplification in receiver or push-pull amplifier service.
- Base
- Not recorded
- Socket
- B5
- Heater
- 4 V
- Sections
- 1
PENB1 Pentode
PENB1 power - pentode single (not beam) (under 10w) electronic tube specifications and datasheets.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 2 V
- Sections
- 1
PENB4 Pentode
Power/output pentode designed for audio-frequency output amplification in receiver or push-pull amplifier service.
- Base
- Not recorded
- Socket
- B7
- Heater
- 4 V
- Sections
- 1
PL802 Pentode
High-slope power pentode designed specifically for luminance and video-output amplification in color television receivers.
- Base
- B9A
- Socket
- B9A
- Heater
- 16 V
- Sections
- 1
PL83 Pentode
High-transconductance series-heater pentode specifically for television video-output amplification.
- Base
- B9A
- Socket
- B9A
- Heater
- 15 V
- Sections
- 1
PL95 Pentode
Compact series-heater audio power pentode providing approximately 3 W output.
- Base
- Not recorded
- Socket
- B7G
- Heater
- 4.5 V
- Sections
- 1
PM22A Pentode
Directly heated 2 V battery power pentode providing approximately 340 mW Class A audio output.
- Base
- Not recorded
- Socket
- B4
- Heater
- 2 V
- Sections
- 1
PM24M Pentode
Mullard directly heated output pentode for AC-mains receivers, providing approximately 2.8 W Class A audio output.
- Base
- Not recorded
- Socket
- B4
- Heater
- 4 V
- Sections
- 1
PTA Pentode
Universal output pentode for automobile radios and AC/DC audio equipment.
- Base
- Not recorded
- Socket
- B7
- Heater
- 4 V
- Sections
- 1
PTT208P Pentode
Long-life power pentode for professional low-frequency output stages, co-designated with R147.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 18 V
- Sections
- 1
QP21 Pentode-Pentode
Quiescent push-pull double pentode for 2-volt battery receiver output stages, designed for low standing current and economical high-tension battery consumption.
- Base
- Not recorded
- Socket
- B7
- Heater
- 2 V
- Sections
- 2
QP22B Pentode-Pentode
Directly heated double output pentode for battery audio power service, providing two matched sections for economical push-pull receiver output.
- Base
- Not recorded
- Socket
- B7
- Heater
- 2 V
- Sections
- 2
R123 Pentode
Long-life professional power-amplifier pentode providing approximately 2 W output.
- Base
- Not recorded
- Socket
- B9A
- Heater
- 18 V
- Sections
- 1
R147 Pentode
Long-life power pentode for low-frequency output amplification in professional equipment.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 18 V
- Sections
- 1
RES164 Pentode
Telefunken battery output pentode for economical audio-frequency power amplification.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 4 V
- Sections
- 1
RES164D Pentode
Telefunken battery screen-grid output pentode providing approximately 0.8 W audio output.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 4 V
- Sections
- 1
RES964 Pentode
Telefunken high-slope audio-frequency output pentode designed for high-volume loudspeaker service. Increased transconductance provides strong low-frequency output from a dedicated receiver power stage.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 4 V
- Sections
- 1
RL12P10 Pentode
German transmitting pentode with manufacturer-published electrical ratings and operating data. The complete German documentation establishes professional radio-frequency power service rather than receiving-type signal amplification.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 12.6 V
- Sections
- 1
TAL4 Pentode
High-slope Tungsram audio power pentode for Class A and push-pull Class B output stages.
- Base
- Not recorded
- Socket
- P8A
- Heater
- 4 V
- Sections
- 1
TCL4 Pentode
Series-heater Tungsram power pentode for transformerless audio-output equipment.
- Base
- Not recorded
- Socket
- P8A
- Heater
- 35 V
- Sections
- 1
TEL2 Pentode
Automotive output pentode for low-frequency power amplification in car-radio equipment.
- Base
- Not recorded
- Socket
- P8A
- Heater
- 6.3 V
- Sections
- 1
UL41 Pentode
Series-heater power pentode providing approximately 4 W Class A audio output in transformerless radios.
- Base
- Not recorded
- Socket
- B8A
- Heater
- 45 V
- Sections
- 1
YL1000 Pentode
Quick-heating directly heated VHF power pentode for mobile RF amplification and frequency multiplication to approximately 200 MHz.
- Base
- Not recorded
- Socket
- B9A
- Heater
- 1.1 V
- Sections
- 1