Data set 01
1960 Mazda
Published operating points and test conditions from this source.
SECTION 1
Pentode
Other
Typical Plate Voltage
200 V
Typical Screen Voltage
200 V
Power Output
3 W
Power - Pentode Single (NOT beam) (under 10W) ·Pentode
PEN3520
Power/output pentode designed for audio-frequency output amplification in receiver or push-pull amplifier service.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 1
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater
- 35 V / 200 mA
Description
Indirectly heated output pentode for AC/DC receivers.
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater voltage
- 35 V
- Nominal heater current
- 200 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Pentode
X-ray radiationInterelectrode capacitances
- Transconductance
- 0.007 S
- Max plate voltage
- 250 V
- Max screen voltage
- 250 V
- Max plate dissipation
- 8 W
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.