RS1082CL

Forced-air-cooled high-power tetrode for SSB and television transmitters to approximately 250 MHz.

Directly heatedCold cathodeCommon cathodeDissimilar

Sections: 1
Base: -
Socket code: -
Base pins: -
Nominal heater: 10 V / 200 A

Description

Coaxial metal-ceramic transmitting tetrode for frequencies up to 250 MHz, forced-air-cooled, particularly suitable for single-sideband and television transmitters.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base: -
Socket code: -
Base pins: -
Nominal heater voltage: 10 V
Nominal heater current: 200 A
Parallel heater voltage: -
Parallel heater current: -
Series capable: No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Tetrode

X-ray radiationInterelectrode capacitances

Transconductance: 0.065 S
Amplification factor: 6.6
Max plate voltage: 10500 V
Max screen voltage: 900 V
Max plate dissipation: 30000 W
Max screen dissipation: 600 W
Max grid dissipation: 300 W
Max cathode current: 15 A

Maximum ratings kept separate from typical operating characteristics; fixed fields use published maximum-rating values where clearly applicable.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1963 Siemens

Published operating points and test conditions from this source.

SECTION 1

Tetrode

Capacitance

Cathode/control grid
125 pF
Cathode/screen grid
10 pF
Cathode/anode
0.2 pF
Control grid/screen grid
155 pF
Control grid/anode
1.6 pF
Screen grid/anode
40 pF

Characteristic

Emission current
80 A