Electronic tube type
Power - Tetrode (NOT beam) (over 1000V 100W) vacuum tubes
Power - Tetrode (NOT beam) (over 1000V 100W) records in Tube Tinker cover 330 tube designations, including 763 preserved original datasheets. Compare bases, sockets, heater requirements, construction, exact variations, and directional replacement options.
- Tube records
- 330
- Original datasheets
- 763
- Variation families
- 25
- Tubes with alternatives
- 5
About Power - Tetrode (NOT beam) (over 1000V 100W) tubes
Tubes of this type must a power tetrode section which takes priority. The max plate watt rating must be over 100 watts and max plate volts over 1000 volts. Qualification also says that this tube did NOT qualify as "HorizontalSweep" or "VerticalSweep"
Electrical range
- Nominal heater voltage
- 1–27 V
- Nominal heater current
- 0.5–1,600 A
Common power - tetrode (not beam) (over 1000v 100w) characteristics
These are the most frequently recorded attributes among tubes in this category.
Bases
- B8-2363
- GIANT 5P METAL-SHELL2
- JUMBO4PIN2
- GIANT 5P1
- Giant 5-Pin1
Sockets
- GIANT58
- RADIALRING94
- B8G3
- B42
- B9A2
- J42
- METALSHELL52
- B4A1
Constructions
- Tetrode328
- BeamPower1
- Tetrode-Tetrode1
Power - Tetrode (NOT beam) (over 1000V 100W) tube list
Page 1 of 7
12E12 Tetrode
Screen-grid tetrode intended for receiver voltage amplification, detector, oscillator, or general Class-A service as documented by the manufacturer.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 26 V
- Sections
- 1
4125A Tetrode
Forced-air-cooled transmitting power tetrode for RF amplifier and oscillator service, capable of several hundred watts output with full ratings into VHF.
- Base
- Not recorded
- Socket
- METALSHELL5
- Heater
- 5 V
- Sections
- 1
4250A Tetrode
Power transmitting tetrode for RF amplifier, oscillator, and modulator service, with 250 W plate dissipation and RF output reaching several hundred watts.
- Base
- Not recorded
- Socket
- GIANT5
- Heater
- 5 V
- Sections
- 1
4400A Tetrode
Forced-air-cooled transmitting tetrode designed for RF power amplification, oscillation, modulation, FM service, and high-power audio-frequency amplifier applications.
- Base
- Not recorded
- Socket
- GIANT5
- Heater
- 5 V
- Sections
- 1
4400C Tetrode
Broadcast-quality radial-beam power tetrode with radiation and forced-air cooling, capable of roughly 1.1 kW Class-C RF output and linear amplifier service.
- Base
- Not recorded
- Socket
- GIANT5
- Heater
- 5 V
- Sections
- 1
4500A Tetrode
Eimac 4-500A broadcast-quality power tetrode designed for amplifier, oscillator, or modulator service. Rugged construction emphasizes long life and consistent performance in professional transmitting equipment.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 10 V
- Sections
- 1
4647 Tetrode
High-power RF tetrode designed for continuous-wave and pulsed amplification to approximately 1 GHz. RCA documentation provides RF, pulse, cooling, and application-specific operating limits.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 3.7 V
- Sections
- 1
4648 Tetrode
High-power RF tetrode designed for continuous-wave and pulsed amplification to approximately 1 GHz. Its transmitting construction supports substantial UHF power under both steady and pulsed operation.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 3.7 V
- Sections
- 1
4CM300000G Tetrode
Eimac ceramic-metal high-power broadcast tetrode using multiphase cooling and pyrolytic-graphite grids. Designed for very high power in professional radio-frequency broadcasting service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 15 V
- Sections
- 1
4CPW10000R Tetrode
Svetlana rugged power tetrode using a directly heated thoriated-tungsten mesh filament, rated for high voltage and high peak current. Designed as a replacement for 4CPW10000/Y442-class power tubes.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 7.5 V
- Sections
- 1
4CV100000C Tetrode
Eimac vapor-cooled ceramic-metal power tetrode designed for roughly 100–200 kW output as RF amplifier or oscillator, linear amplifier, audio amplifier, or modulator.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 10 V
- Sections
- 1
4CV20000A Tetrode
Eimac vapor-cooled ceramic-metal power tetrode designed for oscillator, modulator, and amplifier service in both audio and radio-frequency applications.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 7.5 V
- Sections
- 1
4CV250000 Tetrode
High-power ceramic/metal transmitting tetrode designed for RF power amplification, linear amplification, oscillation, modulation, broadcast, or related high-power service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 12 V
- Sections
- 1
4CV250000A Tetrode
High-power transmitting tetrode designed for RF amplification and modulation, with explicit pulse-modulator and regulator service ratings.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 12 V
- Sections
- 1
4CV250000B Tetrode
High-power transmitting tetrode designed for RF amplification and modulation, with explicit pulse-modulator and regulator service ratings.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 12 V
- Sections
- 1
4CV35000A Tetrode
Vapor-cooled ceramic-metal radial-beam power tetrode for Class-C RF amplification and Class-AB audio-frequency or RF linear power amplification.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
4CV50000E Tetrode
High-power ceramic/metal transmitting tetrode designed for RF power amplification, linear amplification, oscillation, modulation, broadcast, or related high-power service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 12 V
- Sections
- 1
4CV50000J Tetrode
High-power ceramic/metal transmitting tetrode designed for RF power amplification, linear amplification, oscillation, modulation, broadcast, or related high-power service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 12 V
- Sections
- 1
4CV75000A Tetrode
High-power ceramic/metal transmitting tetrode designed for RF power amplification, linear amplification, oscillation, modulation, broadcast, or related high-power service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 10 V
- Sections
- 1
4CV8000A Tetrode
Vapor-cooled ceramic-metal radial-beam power tetrode for low-distortion Class-AB1 audio/RF linear service and Class-C RF power amplification.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 9 V
- Sections
- 1
4CW100000D Tetrode
High-power transmitting tetrode designed for RF amplification and modulation, with explicit pulse-modulator and regulator service ratings.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 10 V
- Sections
- 1
4CW100000E Tetrode
High-power transmitting tetrode designed for RF amplification and modulation, with explicit pulse-modulator and regulator service ratings.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 15.5 V
- Sections
- 1
4CW100000G Tetrode
Liquid-cooled broadcast transmitting tetrode rated 100 kW anode dissipation.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
4CW10000A Tetrode
Water-cooled ceramic-metal radial-beam power tetrode for oscillator, RF amplifier, modulator, and Class-AB audio or RF linear-amplifier service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 7.5 V
- Sections
- 1
4CW150000E Tetrode
4CW150000E power - tetrode (not beam) (over 1000v 100w) electronic tube specifications and datasheets.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 15.5 V
- Sections
- 1
4CW2000A Tetrode
Water-cooled ceramic-metal radial-beam tetrode designed for linear, audio-frequency, and radio-frequency power-amplifier service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6 V
- Sections
- 1
4CW250000A Tetrode
High-power transmitting tetrode designed for RF amplification and modulation, with explicit pulse-modulator and regulator service ratings.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 12 V
- Sections
- 1
4CW250000B Tetrode
High-power transmitting tetrode designed for RF amplification and modulation, with explicit pulse-modulator and regulator service ratings.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 12 V
- Sections
- 1
4CW250000V Tetrode
High-power transmitting tetrode designed for RF amplification and modulation, with explicit pulse-modulator and regulator service ratings.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 12 V
- Sections
- 1
4CW25000A Tetrode
Water-cooled radial-beam power tetrode for RF and television linear amplification and pulsed-regulator switching, with full ratings through 110 MHz.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
4CW50000C Tetrode
High-power ceramic/metal transmitting tetrode designed for RF power amplification, linear amplification, oscillation, modulation, broadcast, or related high-power service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 10 V
- Sections
- 1
4CW50000E Tetrode
High-power ceramic/metal transmitting tetrode designed for RF power amplification, linear amplification, oscillation, modulation, broadcast, or related high-power service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 12 V
- Sections
- 1
4CW50000J Tetrode
High-power ceramic/metal transmitting tetrode designed for RF power amplification, linear amplification, oscillation, modulation, broadcast, or related high-power service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 12 V
- Sections
- 1
4CW800B Tetrode
Liquid-cooled radial-beam power tetrode for distributed and VHF/UHF power amplifiers, ruggedized for severe shock and vibration.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6 V
- Sections
- 1
4CW800F Tetrode
Heater variant of the 4CW800B liquid-cooled radial-beam power tetrode for distributed and VHF/UHF power amplification under severe shock and vibration.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 26.5 V
- Sections
- 1
4CX10000D Tetrode
High-power ceramic/metal transmitting tetrode designed for RF power amplification, linear amplification, oscillation, modulation, broadcast, or related high-power service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 18 V
- Sections
- 1
4CX10000J Tetrode
High-power ceramic/metal transmitting tetrode designed for RF power amplification, linear amplification, oscillation, modulation, broadcast, or related high-power service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 7.5 V
- Sections
- 1
4CX1000A Tetrode
Forced-air-cooled radial-beam tetrode designed for low-voltage, high-current Class-AB1 RF linear and audio-amplifier service with high power gain.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6 V
- Sections
- 1
4CX1000K Tetrode
High-power ceramic/metal transmitting tetrode designed for RF power amplification, linear amplification, oscillation, modulation, broadcast, or related high-power service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6 V
- Sections
- 1
4CX12000A Tetrode
High-power ceramic/metal transmitting tetrode designed for RF power amplification, linear amplification, oscillation, modulation, broadcast, or related high-power service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.5 V
- Sections
- 1
4CX125C Tetrode
High-power ceramic/metal transmitting tetrode designed for RF power amplification, linear amplification, oscillation, modulation, broadcast, or related high-power service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6 V
- Sections
- 1
4CX125F Tetrode
High-power ceramic/metal transmitting tetrode designed for RF power amplification, linear amplification, oscillation, modulation, broadcast, or related high-power service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 26.5 V
- Sections
- 1
4CX15000A Tetrode
High-power ceramic/metal transmitting tetrode designed for RF power amplification, linear amplification, oscillation, modulation, broadcast, or related high-power service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 7.5 V
- Sections
- 1
4CX15000J Tetrode
High-power ceramic/metal transmitting tetrode designed for RF power amplification, linear amplification, oscillation, modulation, broadcast, or related high-power service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 7.5 V
- Sections
- 1
4CX15000R Tetrode
Air-cooled power tetrode designed for audio and RF applications, particularly VHF FM broadcast transmitters in the 88–108 MHz band.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
4CX1500A Tetrode
High-power transmitting tetrode designed for RF amplification and modulation, with explicit pulse-modulator and regulator service ratings.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 5 V
- Sections
- 1
4CX1500B Tetrode
High-power ceramic/metal transmitting tetrode designed for RF power amplification, linear amplification, oscillation, modulation, broadcast, or related high-power service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6 V
- Sections
- 1
4CX1600B Tetrode
High-power ceramic/metal transmitting tetrode designed for RF power amplification, linear amplification, oscillation, modulation, broadcast, or related high-power service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 12.6 V
- Sections
- 1