Data set 01
1963 Siemens
Published operating points and test conditions from this source.
SECTION 1
Tetrode
Capacitance
Ckgi
110 pF
Cg1g2
150 pF
Cg2a
40 pF
Power - Tetrode (NOT beam) (over 1000V 100W) ·Tetrode
RS1082C
Very-high-power Siemens linear tetrode for commercial single-sideband transmitters to approximately 250 MHz.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 1
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater
- 10 V / 200 A
Description
Metal-ceramic transmitting tetrode for frequencies up to 250 MHz, particularly suitable for commercial single-sideband transmitters.
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater voltage
- 10 V
- Nominal heater current
- 200 A
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Tetrode
X-ray radiationInterelectrode capacitances
- Transconductance
- 0.065 S
- Amplification factor
- 6
- Max plate voltage
- 10500 V
- Max screen voltage
- 900 V
- Max plate dissipation
- 25000 W
- Max screen dissipation
- 600 W
- Max grid dissipation
- 300 W
- Max cathode current
- 15 A
Maximum ratings kept separate from typical operating characteristics; fixed fields use published maximum-rating values where clearly applicable.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.