Skip to main content
Tube Tinker — Electron Tube Database
Alternatives & variationsDownload PDF datasheet

Power - Tetrode (NOT beam) (over 1000V 100W) ·Tetrode

RS1034SK

Higher-power Siemens RS1034-family UHF tetrode with 25 kW plate dissipation for operation to approximately 960 MHz.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
1
Base
-
Socket code
-
Base pins
-
Nominal heater
4.5 V / 200 A

Description

FRAME4/home/SMC-Archiv-DB/GG-RO-engl/DB-Senderoehren-96_BNR-B442-P4213-X-X-7600/RS1034

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
-
Socket code
-
Base pins
-
Nominal heater voltage
4.5 V
Nominal heater current
200 A
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Tetrode

X-ray radiationInterelectrode capacitances
Transconductance
0.12 S
Amplification factor
7.5
Max plate voltage
7500 V
Max screen voltage
1000 V
Max plate dissipation
25000 W
Max cathode current
6 A

Ratings, characteristics, and operating tables audited semantically; repeated identical systems represented once where applicable.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1963 Siemens

Published operating points and test conditions from this source.

SECTION 1

Tetrode

Other

  • Heater voltage UF 4,5 V

    -

  • at UA = UG2 = UG1 = 300 V

    -

  • at UA = 2 kV, UG2 = 500 to 800 V, I A = 3 A

    -

  • at UA = 2 kV, UG2 = 800 V, I A = 2 to 4 A

    -

  • Frequency f 960 MHz

    -

  • Anode voltage (dc) (RS 1034 L) UA 5,5 kV

    -

  • Anode voltage (dc) (RS 1034 SK) UA 7,5 kV

    -

  • Screen grid voltage (dc) UG2 1000 V

    -

  • Control grid voltage (dc) UG1 – 200 V

    -

  • Anode dissipation (RS 1034 L) PA 13 kW

    -

  • Anode dissipation (RS 1034 SK) PA 25 kW

    -

  • Screen grid dissipation PG2 180 W

    -

  • Control grid dissipation PG1 80 W

    -

  • Frequency f 470 … 800 470 … 800 MHz

    -

  • Anode voltage (dc) UA 6,6 5,1 kV

    -

  • Screen grid voltage (dc) UG2 800 800 V

    -

  • Control grid voltage (dc) UG1 – 110 – 110 V

    -

  • Anode dissipation, black level PA SW 21,4 11,4 kW

    -

  • Screen grid dissipation, black level PG2 SW 110 48 W

    -

  • Frequency f 960 MHz

    -

  • Anode voltage (dc) (RS 1034 L) UA 5,5 kV

    -

  • Anode voltage (dc) (RS 1034 SK) UA 7,5 kV

    -

  • Screen grid voltage (dc) UG2 1000 V

    -

  • Control grid voltage (dc) UG1 – 200 V

    -

  • Anode dissipation (RS 1034 L) PA 13 kW

    -

  • Anode dissipation (RS 1034 SK) PA 25 kW

    -

  • Screen grid dissipation PG2 180 W

    -

  • Control grid dissipation PG1 80 W

    -

  • Frequency f 470 … 800 470 … 800 MHz

    -

  • Anode voltage (dc) UA 6,3 5,1 kV

    -

  • Screen grid voltage (dc) UG2 800 800 V

    -

  • Control grid voltage (dc) UG1 – 112 – 108 V

    -

  • Anode dissipation, black level PA SW 16,2 10,1 kW

    -

  • imum anode dissipation, as well as pressure drop and water outlet temperature at 70 °C water inlet

    -

  • In conjunction with pull switch RöKt11 it disconnects the voltages at the tube in case of overload

    -

  • UG1 = f (UA) Parameter = IA

    -

  • UG2 = 500 V Parameter = IG2

    -

  • UG1 = f (UA) Parameter = IA

    -

  • UG2 = 800 V Parameter = IG2

    -

Current

  • Heater current IF ≈ 200 A

    -

  • Emission current I em 45 A

    -

  • Cathode current (dc) IK 6,0 A

    -

  • Peak cathode current IK M 40 A

    -

  • Zero-signal anode current (dc) IA 0 2,2 4) 1,6 4) A

    -

  • Anode current (dc), black level I A SW 5,3 4) 3,6 4) A

    -

  • Screen grid current (dc), black level I G2 SW 140 60 mA

    -

  • Cathode current (dc) IK 6,0 A

    -

  • Peak cathode current IK M 40 A

    -

  • Zero-signal anode current (dc) IA 0 1,8 1,8 A 3)

    -

  • Anode current (dc), black level I A SW 3,9 2,8 A

    -

  • Screen grid current (dc), black level I G2 SW 90 50 mA

    -

  • Ø 0,12 mm should be used to test the anode overcurrent trip circuit.

    -

Characteristic

  • Amplification factor of screen grid µg2g1 7,5

    -

  • Transconductance s 120 mA/V

    -