Tube cross-reference
E95F alternatives, equivalents, and replacements
Review exact electrical variations and directional substitutions recorded for the E95F voltage pentode. Compare core specifications and verify every restriction before using a replacement.
Replacement tubes for E95F
The following tubes are recorded as possible replacements for E95F. This direction does not establish that E95F can replace them.
Voltage Pentode - Sharp Cutoff (single)
The database records 6AK5 as a possible replacement forE95F.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | Not recorded | 7BD |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.175 A | 0.175 A |
Where E95F can be used as the replacement
In these recorded relationships, E95F is the replacement tube. The listed original tubes are not automatically suitable as replacements for E95F.
Voltage Pentode - High Frequency (single)
The database records E95F as a possible replacement for5591.
No special restrictions are recorded for this substitution.
| Specification | E95F replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode | Voltage Pentode - High Frequency (single) |
| Construction | Pentode | Pentode |
| Base | Not recorded | E7-1 |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.175 A | 0.15 A |
Voltage - Dual Triode (similar)
The database records E95F as a possible replacement for5608.
No special restrictions are recorded for this substitution.
| Specification | E95F replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode | Voltage - Dual Triode (similar) |
| Construction | Pentode | Triode-Triode |
| Base | Not recorded | Not recorded |
| Socket | B7G | B9A |
| Base pins | 7 | Not recorded |
| Sections | 1 | 2 |
| Heater voltage | 6.3 V | 2.5 V |
| Heater current | 0.175 A | 2 A |
Voltage Pentode - Sharp Cutoff (single)
The database records E95F as a possible replacement for5654.
No special restrictions are recorded for this substitution.
| Specification | E95F replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | Not recorded | E7-1 |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.175 A | 0.175 A |
Voltage Pentode - Sharp Cutoff (single)
The database records E95F as a possible replacement for6096.
No special restrictions are recorded for this substitution.
| Specification | E95F replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | Not recorded | Not recorded |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.175 A | 0.175 A |
Voltage Pentode - Sharp Cutoff (single)
The database records E95F as a possible replacement for6AK5.
No special restrictions are recorded for this substitution.
| Specification | E95F replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | Not recorded | 7BD |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.175 A | 0.175 A |
Verify before substituting
Matching a base or heater voltage is not enough to prove that two tubes are interchangeable. Check pin connections, heater current, maximum ratings, bias requirements, warm-up behavior, and the equipment manufacturer’s service documentation before making a substitution.
View the complete E95F specifications →