Alternatives & variations Download PDF datasheet

DN76

Philips high-vacuum oscillography CRT with electrostatic beam control and a long-persistence display screen. The persistent trace is intended for measurements where waveforms must remain visible after the writing beam passes.

Directly heatedCold cathodeCommon cathodeDissimilarSpecialized

Sections: 1
Base: -
Socket code: B8G
Base pins: -
Nominal heater: 6.3 V / 300 mA

Description

Oscillography cathode-ray tube with electrostatic focusing and double electrostatic deflection; green, long persistence.

Socket description

Loctal 8-contact

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base: -
Socket code: B8G
Base pins: -
Nominal heater voltage: 6.3 V
Nominal heater current: 300 mA
Parallel heater voltage: -
Parallel heater current: -
Series capable: No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Cathode Ray

X-ray radiationInterelectrode capacitances

Max plate voltage: 400 V

Electrostatic focusing/deflection CRT section; electrical/screen/deflection data retained in parameter rows.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1957 Philips Receiving and Amplifying Tubes

Published operating points and test conditions from this source.

SECTION 1

Cathode Ray

Other

Maximum Plate Voltage
400 V
Grid 2 Operating Voltage Minimum
200 V
Grid 2 Operating Voltage Maximum
300 V
Maximum Grid 2 Voltage
400 V

Characteristic

Focusing Method
Electrostatic
Deflection Method
Double electrostatic
Screen Variant
green, long persistence