Skip to main content

Specialized tube type

Specialized - Cathode Ray vacuum tubes

Specialized - Cathode Ray records in Tube Tinker cover 2,511 tube designations, including 5,292 preserved original datasheets. Compare bases, sockets, heater requirements, construction, exact variations, and directional replacement options.

Search this type in the catalog →
Tube records
2,511
Original datasheets
5,292
Variation families
2
Tubes with alternatives
518

About Specialized - Cathode Ray tubes

Apply this if the tube is a cathode ray tube of any purpose, television, radar, etc.

Electrical range

Nominal heater voltage
0–20,000 V
Nominal heater current
0–600 A

Common specialized - cathode ray characteristics

These are the most frequently recorded attributes among tubes in this category.

Bases

  • 12L63
  • 8HR52
  • 12N45
  • B12A40
  • 12D21
  • 12O18
  • B12F17
  • B6-6311

Sockets

  • B12A228
  • DUODECAL5199
  • B12D110
  • NEOEIGHTAR793
  • B14A78
  • DUODECAL660
  • DIHEPTAL1251
  • IO51

Constructions

  • CathodeRay2,477
  • CathodeRay-CathodeRay24
  • ImageStorage5
  • CathodeRay-CathodeRay-CathodeRay2
  • ImageStorage-ImageStorage2
  • CathodeRay-Triode1

Specialized - Cathode Ray tube list

Page 1 of 53

Open advanced catalog filters →
  • 1000H

    CathodeRay

    Electrostatically deflected cathode-ray display tube with post-acceleration capability to 8 kV, intended for displaying electrical waveforms with separate horizontal and vertical deflection-plate drive.

    Base
    B12F
    Socket
    Not recorded
    Heater
    6.3 V
    Sections
    2
  • 108D12GY119

    CathodeRay

    High-bandwidth electrostatic cathode-ray display tube for instrumentation, with bandwidth to 25 MHz, a useful deflection area around 80 × 64 mm, and provisions for focus and astigmatism correction.

    Base
    Not recorded
    Socket
    B12F
    Heater
    6.3 V
    Sections
    1
  • 10ABP4

    CathodeRay

    Direct-view rectangular picture tube using electrostatic focusing and magnetic deflection, designed for approximately 90-degree scanning and operation with an anode supply up to 12 kV.

    Base
    B6-43
    Socket
    DUODECAL6
    Heater
    6.3 V
    Sections
    1
  • 10ADP4

    CathodeRay

    Direct-view rectangular P4 picture tube using electrostatic focusing and magnetic deflection, designed for approximately 90-degree scanning with a 12 kV maximum anode rating.

    Base
    B6-53
    Socket
    DUODECAL6
    Heater
    Not recorded
    Sections
    1
  • 10AJP4

    CathodeRay

    Direct-view P4 cathode-ray picture tube with electrostatic focusing and 90-degree magnetic deflection, typically operated around 16 kV and rated for a maximum accelerator voltage of 20 kV.

    Base
    B5-57
    Socket
    DUODECAL5
    Heater
    6.3 V
    Sections
    1
  • 10AKP7

    CathodeRay

    Magnetically focused and deflected P7 cathode-ray display tube with blue-white fluorescence and long yellow phosphorescence, typically operated at about 8 kV anode voltage.

    Base
    12D
    Socket
    DUODECAL5
    Heater
    6.3 V
    Sections
    1
  • 10ALP14

    CathodeRay

    Electrostatically focused and deflected cathode-ray display tube using an aluminized P14 screen, producing blue-purple fluorescence with medium-long persistence.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    6.3 V
    Sections
    1
  • 10ALP19

    CathodeRay

    Electrostatically focused and deflected cathode-ray display tube using an aluminized P19 screen, producing orange fluorescence with long persistence.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    6.3 V
    Sections
    1
  • 10ALP2

    CathodeRay

    Electrostatically focused and deflected cathode-ray display tube using an aluminized P2 screen, providing yellow-green to green fluorescence with long persistence.

    Base
    Not recorded
    Socket
    DIMAGNAL22
    Heater
    6.3 V
    Sections
    1
  • 10ALP25

    CathodeRay

    Electrostatically focused and deflected cathode-ray display tube using an aluminized P25 screen, producing orange fluorescence with very long persistence.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    6.3 V
    Sections
    1
  • 10ALP7

    CathodeRay

    Electrostatically focused and deflected cathode-ray display tube using an aluminized P7 screen, with blue-white fluorescence and long persistence.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    6.3 V
    Sections
    1
  • 10AMP7

    CathodeRay-Triode

    Low-drive cathode-ray display tube designed for low-voltage electrostatic drive, capable of full-brightness modulation from a small input signal while operating its CRT anode at about 10 kV.

    Base
    Not recorded
    Socket
    DUODECAL7
    Heater
    8 V
    Sections
    2
  • 10ANP16

    CathodeRay

    Magnetically focused and deflected P16 cathode-ray display tube with violet, extremely short-persistence fluorescence, approximately 50-degree deflection, and typical 9 kV anode operation.

    Base
    Not recorded
    Socket
    B12A
    Heater
    6.3 V
    Sections
    1
  • 10ANP19

    CathodeRay

    Magnetically focused and deflected P19 cathode-ray display tube with orange long-persistence fluorescence, approximately 50-degree deflection, and typical 9 kV anode operation.

    Base
    Not recorded
    Socket
    B12A
    Heater
    6.3 V
    Sections
    1
  • 10ANP25

    CathodeRay

    Magnetically focused and deflected P25 cathode-ray display tube with orange long-persistence fluorescence, approximately 50-degree deflection, and typical 9 kV anode operation.

    Base
    Not recorded
    Socket
    B12A
    Heater
    6.3 V
    Sections
    1
  • 10ANP4

    CathodeRay

    Magnetically focused and deflected P4 cathode-ray display tube with white medium-persistence fluorescence, approximately 50-degree deflection, and typical 9 kV anode operation.

    Base
    Not recorded
    Socket
    B12A
    Heater
    6.3 V
    Sections
    1
  • 10ANP7

    CathodeRay

    Magnetically focused and deflected P7 cathode-ray display tube with blue fluorescence and long yellow phosphorescence, approximately 50-degree deflection, and typical 9 kV anode operation.

    Base
    Not recorded
    Socket
    B12A
    Heater
    6.3 V
    Sections
    1
  • 10BP4

    CathodeRay

    P4 cathode-ray picture tube documented with a 6.3 V, 0.6 A heater; the available manufacturer material identifies the type but provides little additional functional detail.

    Base
    Not recorded
    Socket
    DUODECAL5
    Heater
    6.3 V
    Sections
    1
  • 10BP4A

    CathodeRay

    P4 cathode-ray picture tube with a 6.3 V, 0.6 A heater; available Tung-Sol and General Electric documentation provides limited additional descriptive detail.

    Base
    Not recorded
    Socket
    DUODECAL5
    Heater
    6.3 V
    Sections
    1
  • 10BP4D

    CathodeRay

    Sheldon 10BP4D 10-inch monochrome television CRT with magnetic focus and deflection, ion-trap gun, metal-backed P4 white screen, 6.3 V 0.6 A heater.

    Base
    12D
    Socket
    Not recorded
    Heater
    6.3 V
    Sections
    1
  • 10CP4

    CathodeRay

    North American Philips 10CP4 10-inch monochrome television CRT with magnetic focus and deflection, P4 white phosphor and 6.3 V 0.6 A heater.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    6.3 V
    Sections
    1
  • 10D18GY

    CathodeRay

    Electrostatic cathode-ray display tube for oscilloscope-style instrumentation, with a useful deflection area about 120 × 96 mm and acceleration around 2.0–2.5 kV.

    Base
    Not recorded
    Socket
    B12F
    Heater
    6.3 V
    Sections
    1
  • 10DP4

    CathodeRay

    Cathode-ray display tube documented by General Electric; the available source contains insufficient extracted technical detail to support a more specialized functional description.

    Base
    Not recorded
    Socket
    DUODECAL5
    Heater
    6.3 V
    Sections
    1
  • 10FP4

    CathodeRay

    Cathode-ray display tube with a 6.3 V heater and typical accelerator operation around 9 kV, intended for direct visual display with conventional grid-controlled beam intensity.

    Base
    Not recorded
    Socket
    B12A
    Heater
    6.3 V
    Sections
    1
  • 10FP4A

    CathodeRay

    Magnetically focused and deflected white-screen cathode-ray display tube explicitly specified for radar, monitor, and display service, with typical high-voltage operation around 10 kV.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    6.3 V
    Sections
    1
  • 10HP4

    CathodeRay

    10HP4 specialized - cathode ray electronic tube specifications and datasheets.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    6.3 V
    Sections
    1
  • 10KP17

    CathodeRay

    10KP17 10-inch radar oscillograph CRT with magnetic focus and deflection and a metal-backed dual-persistence P17 screen, 6.3 V 0.6 A heater.

    Base
    12D
    Socket
    Not recorded
    Heater
    6.3 V
    Sections
    1
  • 10KP7

    CathodeRay

    Magnetically focused and deflected P7 cathode-ray display tube with blue-white fluorescence and long yellow phosphorescence, approximately 50-degree deflection, and typical 9 kV anode operation.

    Base
    Not recorded
    Socket
    B12A
    Heater
    6.3 V
    Sections
    1
  • 10KP7A

    CathodeRay

    High-resolution magnetically focused and deflected P7 cathode-ray display tube, with blue-white fluorescence, long yellow phosphorescence, approximately 50-degree deflection, and typical 9 kV anode operation.

    Base
    Not recorded
    Socket
    B12A
    Heater
    6.3 V
    Sections
    1
  • 10KP7B

    CathodeRay

    High-resolution aluminized P7 cathode-ray display tube using magnetic focusing and deflection, with blue-white fluorescence, long yellow phosphorescence, and an anode rating up to 13.2 kV.

    Base
    Not recorded
    Socket
    B12A
    Heater
    6.3 V
    Sections
    1
  • 10MP4

    CathodeRay

    10MP4 specialized - cathode ray electronic tube specifications and datasheets.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    6.3 V
    Sections
    1
  • 10MP4A

    CathodeRay

    10MP4A specialized - cathode ray electronic tube specifications and datasheets.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    6.3 V
    Sections
    1
  • 10MW4A

    CathodeRay

    Cathode-ray display tube using magnetic focusing and magnetic deflection, documented with a 4 V, 1 A heater in Cintel technical data.

    Base
    Not recorded
    Socket
    IO
    Heater
    4 V
    Sections
    1
  • 10NP11

    CathodeRay

    Magnetically focused and deflected P11 cathode-ray display tube with a gray filter faceplate, aluminized blue short-persistence screen, approximately 52-degree deflection, and an anode rating up to 25 kV.

    Base
    Not recorded
    Socket
    DUODECAL5
    Heater
    6.3 V
    Sections
    1
  • 10QP7

    CathodeRay

    High-voltage P7 cathode-ray display tube with magnetic focusing, designed around a 20 kV collector supply and grid-controlled beam intensity for direct visual display.

    Base
    Not recorded
    Socket
    DUODECAL6
    Heater
    6.3 V
    Sections
    1
  • 10RP4

    CathodeRay

    Ten-inch direct-view television cathode-ray tube using electrostatic focusing and magnetic deflection. Its metal-backed screen and external conductive coating support bright picture display, with the accelerator/anode operated at about 14 kV.

    Base
    Not recorded
    Socket
    B12A
    Heater
    6.3 V
    Sections
    1
  • 10SA1

    CathodeRay

    Cathode-ray display tube documented by Mazda for low-voltage electrostatic operation, with a second-anode rating around 1.5 kV and grid control. Its comparatively modest accelerating voltage distinguishes it from high-voltage television picture tubes.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    6.3 V
    Sections
    1
  • 10SP4

    CathodeRay

    Ten-inch P4 white-screen cathode-ray display tube with electrostatic focusing and magnetic deflection. The aluminized screen, roughly 50-degree deflection, and high anode-voltage capability suit bright direct-view monitor and display service.

    Base
    Not recorded
    Socket
    DUODECAL6
    Heater
    6.3 V
    Sections
    1
  • 10UP14B

    CathodeRay

    Ten-inch cathode-ray display tube with electrostatic focusing, magnetic deflection, and an aluminized P14 screen. Its blue-purple fluorescence and medium-long persistence make it suitable for applications where displayed traces must remain visible after excitation.

    Base
    Not recorded
    Socket
    B12A
    Heater
    6.3 V
    Sections
    1
  • 10UP21

    CathodeRay

    Ten-inch cathode-ray display tube using electrostatic focusing and magnetic deflection. Its aluminized P21 screen gives orange fluorescence with long persistence, emphasizing sustained visual presentation rather than ordinary short-persistence television imagery.

    Base
    Not recorded
    Socket
    B12A
    Heater
    6.3 V
    Sections
    1
  • 10UP7A

    CathodeRay

    Ten-inch cathode-ray display tube documented for high-voltage screen operation. The available manufacturer material identifies it as a specialized CRT; sparse surviving data support a conservative display classification without assigning undocumented application-specific properties.

    Base
    Not recorded
    Socket
    DUODECAL6
    Heater
    6.3 V
    Sections
    1
  • 10VP15

    CathodeRay

    Ten-inch cathode-ray display tube with magnetic focusing and magnetic deflection. Its aluminized P15 screen produces blue-green fluorescence with extremely short persistence, making it suited to fast-changing displays where residual image must decay rapidly.

    Base
    Not recorded
    Socket
    DUODECAL5
    Heater
    6.3 V
    Sections
    1
  • 10WP14

    CathodeRay

    Ten-inch cathode-ray display tube with electrostatic focusing, magnetic deflection, and a P14 blue screen of medium-long persistence. It normally operates around 10 kV and uses a non-aluminized screen in the Sylvania documentation.

    Base
    Not recorded
    Socket
    B12A
    Heater
    6.3 V
    Sections
    1
  • 10WP14A

    CathodeRay

    Ten-inch cathode-ray display tube with electrostatic focusing and magnetic deflection. The aluminized P14 blue screen has medium-long persistence; typical operation uses about 10 kV anode voltage with adjustable electrostatic focus.

    Base
    Not recorded
    Socket
    B12A
    Heater
    6.3 V
    Sections
    1
  • 10WP19

    CathodeRay

    Ten-inch cathode-ray display tube using electrostatic focusing and magnetic deflection. Its P19 screen produces orange fluorescence with long persistence, providing a lingering trace or image at typical anode operation around 10 kV.

    Base
    Not recorded
    Socket
    B12A
    Heater
    6.3 V
    Sections
    1
  • 10WP19A

    CathodeRay

    Ten-inch cathode-ray display tube with electrostatic focusing, magnetic deflection, and an aluminized P19 orange long-persistence screen. Documentation also identifies ruggedized construction for military or professional equipment, distinguishing it from the basic 10WP19.

    Base
    Not recorded
    Socket
    B12A
    Heater
    6.3 V
    Sections
    1
  • 10WP7

    CathodeRay

    Ten-inch cathode-ray display tube with electrostatic focusing and magnetic deflection. Its P7 screen combines blue fluorescence with long yellow phosphorescence, providing a persistent afterglow useful for viewing transient or slowly refreshed information.

    Base
    Not recorded
    Socket
    DUODECAL6
    Heater
    6.3 V
    Sections
    1
  • 10WP7A

    CathodeRay

    Ten-inch cathode-ray display tube with electrostatic focusing, magnetic deflection, and an aluminized P7 screen. It combines blue fluorescence with long persistence, retaining displayed information substantially longer than ordinary short-persistence picture tubes.

    Base
    Not recorded
    Socket
    B12A
    Heater
    6.3 V
    Sections
    1