Data set 01
1957 Philips Receiving and Amplifying Tubes
Published operating points and test conditions from this source.
SECTION 1
Cathode Ray
Characteristic
Heater Voltage
6.3 V
Heater Current
600 mA
DeflectionMethod
Electrostatic
Specialized - Cathode Ray ·CathodeRay
DB1334
Philips cathode-ray oscilloscope tube for oscillography, using electrostatic beam control. Manufacturer documentation provides screen, focusing and deflection, capacitance, sensitivity, rating, and operating data where published.
Directly heatedCold cathodeCommon cathodeDissimilarSpecialized
- Sections
- 1
- Base
- -
- Socket code
- B12A
- Base pins
- -
- Nominal heater
- 6.3 V / 600 mA
Description
High-sensitivity oscillography cathode-ray tube with electrostatic deflection.
Socket description
Duodecal 12-contact
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- B12A
- Base pins
- -
- Nominal heater voltage
- 6.3 V
- Nominal heater current
- 600 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Cathode Ray
X-ray radiationInterelectrode capacitances
- Max plate voltage
- 6000 V
Electrostatic focusing/deflection CRT section; electrical/screen/deflection data retained in parameter rows.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 02
1963 Philips Electron Tubes Handbook V2
Published operating points and test conditions from this source.
SECTION 1
Cathode Ray
Characteristic
Deflection sensitivity N1 without post-acceleration
0.68 to 0.84 mm/V
Deflection sensitivity N2 without post-acceleration
0.51 to 0.63 mm/V
Deflection sensitivity N1 with post-acceleration
0.51 to 0.63 mm/V
Deflection sensitivity N2 with post-acceleration
0.38 to 0.47 mm/V
Other
Maximum post-acceleration voltage
6000 V
Maximum main accelerating voltage
2600 V
Minimum main accelerating voltage
1000 V
Maximum focusing-grid voltage
1000 V
Maximum heater-cathode voltage
180 V
Data set 03
1999 Philips 0-D
Published operating points and test conditions from this source.
SECTION 1
Cathode Ray
Other
Accelerator voltage
2600 V
Minimum accelerator voltage
1000 V
Maximum post-acceleration ratio
2.3