Skip to main content
Tube Tinker — Electron Tube Database
Alternatives & variationsDownload PDF datasheet

Specialized - Cathode Ray ·CathodeRay

D10363GY125

Philips instrument cathode-ray tube for oscilloscope or precision display service, using electrostatic beam control and manufacturer-specified focusing, acceleration, capacitance, screen, and deflection characteristics.

Directly heatedCold cathodeCommon cathodeDissimilarSpecialized
Sections
1
Base
-
Socket code
-
Base pins
-
Nominal heater
-

Description

Philips cathode-ray tube intended for oscilloscope or instrument-display service. The datasheet specifies screen, heating, electrostatic deflection, accelerator/focusing voltages, capacitances, operating characteristics, and limiting values as applicable.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
-
Socket code
-
Base pins
-
Nominal heater voltage
-
Nominal heater current
-
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Cathode Ray

X-ray radiationInterelectrode capacitances

No fixed ratings are recorded for this section.

Published electrical ratings and operating data captured in promoted fields where directly applicable and additional parameter rows.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1999 Philips 0-D

Published operating points and test conditions from this source.

SECTION 1

Cathode Ray

Other

  • for small oscilloscopes with up to

    0 MHz

    Published datasheet specification

  • Accelerator voltage Vg

    4

    Published datasheet specification

  • Minimum useful scan area

    0 mm

    Published datasheet specification

  • horizontal M,

    7 V

    Published datasheet specification

  • vertical My

    5 V

    Published datasheet specification

  • Useful screen area »

    0 mm

    Published datasheet specification

  • Useful scan area »

    0 mm

    Published datasheet specification

  • Heater voltage V¢

    3 V

    Published datasheet specification

  • Heater current e

    0 mA

    Published datasheet specification

  • Heating time to attain

    0

    Published datasheet specification

  • Overall length (including socket) ‘ | ' ‘ «

    66 mm

    Published datasheet specification

  • Faceplate dimension& ‘ \

    2

    Published datasheet specification

  • Mu metal shield S _ “type

    5463

    Published datasheet specification

  • Published specification

    1

    Published datasheet specification

  • Published specification

    3.4 pF

    Published datasheet specification

  • Published specification

    50

    Published datasheet specification

  • pass through an opening of

    5 mm

    Published datasheet specification

  • Published specification

    350 mm

    Published datasheet specification

  • w|wasn|nnnw|ognn |vobtTranafanny | pune|wrruan (

    3

    Published datasheet specification

  • } Q //:a -IJI- i-l

    4

    Published datasheet specification

  • The reference points A1, A2 and A3 are for aligning the gratlcule with the faceplate (|a1 - a2

    0.25

    Published datasheet specification

  • Published specification

    0.15 mm

    Published datasheet specification

  • Published specification

    0.3 mm

    Published datasheet specification

  • Mean deflection plate potential

    2

    Published datasheet specification

  • Published specification

    4

    Published datasheet specification

  • Focus voltage o VgS

    0

    Published datasheet specification

  • Gut-off voltage for visual extinction of focused spot -V a

    221065 V

    Published datasheet specification

  • in horizontal direction . <

    9

    Published datasheet specification

  • x-axis, outer graticule line '

    30

    Published datasheet specification

  • Line width Lw. approx

    25 mm

    Published datasheet specification

  • Accelerator voltage ‘ | ' Vgé'g

    2.2 kV

    Published datasheet specification

  • Shield voltage ‘ : VgE(fl) Cmax,

    2 kV

    Published datasheet specification

  • Focus electrode voltage ' ' Vg

    2 kV

    Published datasheet specification

  • Control grid voltage ' ' 'Vg

    200 V

    Published datasheet specification

  • positive Vig max

    25 V

    Published datasheet specification

  • negative ' - Vg max

    25 V

    Published datasheet specification

  • Heater voltage L _ Vi max

    6 V

    Published datasheet specification

  • graticule, application of an external passe-partout with an open area of max

    0 mm

    Published datasheet specification

  • A difference between mean x- and y-potentials up to

    5 V

    Published datasheet specification

  • range of £

    0 V

    Published datasheet specification

  • Optimum spot is obtained with V!g

    2

    Published datasheet specification

  • of £

    5

    Published datasheet specification

  • An actual focus range of

    0 V

    Published datasheet specification

  • The sensitivity at a deflection of less than

    5

    Published datasheet specification

  • at a deflection of

    5

    Published datasheet specification

  • A graticule consisting of concentric rectangles of

    8 mm

    Published datasheet specification

  • Published specification

    0

    Published datasheet specification

  • conditions, adjusted for aptimum spot size at beam current I,

    10

    Published datasheet specification