Skip to main content
Tube Tinker — Electron Tube Database
Alternatives & variationsDownload PDF datasheet

Specialized - Cathode Ray ·CathodeRay

D10180GY

Philips instrument cathode-ray tube for oscilloscope or precision display service, using electrostatic beam control and manufacturer-specified focusing, acceleration, capacitance, screen, and deflection characteristics.

Directly heatedCold cathodeCommon cathodeDissimilarSpecialized
Sections
1
Base
-
Socket code
-
Base pins
-
Nominal heater
63 V / 24 A

Description

Philips cathode-ray tube intended for oscilloscope or instrument-display service. The datasheet specifies screen, heating, electrostatic deflection, accelerator/focusing voltages, capacitances, operating characteristics, and limiting values as applicable.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
-
Socket code
-
Base pins
-
Nominal heater voltage
63 V
Nominal heater current
24 A
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Cathode Ray

X-ray radiationInterelectrode capacitances

No fixed ratings are recorded for this section.

Published electrical ratings and operating data captured in promoted fields where directly applicable and additional parameter rows.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1999 Philips 0-D

Published operating points and test conditions from this source.

SECTION 1

Cathode Ray

Other

  • Published specification

    0 cm

    Published datasheet specification

  • for portable oscilloscopes with up to

    56 MHz

    Published datasheet specification

  • Minimum useful scan area

    0

    Published datasheet specification

  • horizontal My

    6 V

    Published datasheet specification

  • vertical My

    3 V/cm

    Published datasheet specification

  • Useful screen area >

    0

    Published datasheet specification

  • Useful scan area

    70

    Published datasheet specification

  • Heater voltage Vs

    3 V

    Published datasheet specification

  • Heater current I

    24 A

    Published datasheet specification

  • Overall length (socket included) <

    40 mm

    Published datasheet specification

  • edges. If use is made of this dynamic correction, a negative voitage proportional to, and approx

    0

    Published datasheet specification

  • Published specification

    7

    Published datasheet specification

  • Published specification

    1

    Published datasheet specification

  • Published specification

    2

    Published datasheet specification

  • Published specification

    4

    Published datasheet specification

  • Published specification

    9

    Published datasheet specification

  • y{toy

    1

    Published datasheet specification

  • Control grid to all other elements Cg

    6 pF

    Published datasheet specification

  • Cathode to all other elements Ck

    7 pF

    Published datasheet specification

  • * The tube has a trace rotation coil, fixed onto the lower cone part. The coil has

    0

    Published datasheet specification

  • typical resistance of

    65

    Published datasheet specification

  • Thus maximum required voltage is approx

    1 V

    Published datasheet specification

  • 100 kQ 96

    4

    Published datasheet specification

  • will pass through an opening of

    5 mm

    Published datasheet specification

  • Published specification

    350 mm

    Published datasheet specification

  • w (August

    982

    Published datasheet specification

  • horizontal >

    0 mm

    Published datasheet specification

  • vertical

    56 mm

    Published datasheet specification

  • Published specification

    6 V

    Published datasheet specification

  • Published specification

    3 V

    Published datasheet specification

  • Line width at 10 uA beam current

    0.2 mm

    Published datasheet specification

  • Grid drive for

    0 uA

    Published datasheet specification

  • calibration. Correction is obtained at V5

    1800

    Published datasheet specification

  • beam current of approx

    0 uA

    Published datasheet specification

  • Vy1

    2

    Published datasheet specification

  • Measure the current on x2 and adjust Vg1 for I,

    10

    Published datasheet specification

  • Published specification

    75

    Published datasheet specification

  • at a deflection of

    6

    Published datasheet specification

  • Published specification

    70 mm

    Published datasheet specification