Power - Tetrode (NOT beam) (over 1000V 100W) ·Tetrode
High-power transmitting tetrode designed for RF power amplification, linear amplification, oscillation, modulation, or frequency multiplication.
Radiation/air-cooled power tetrode for AM and SSB amplifier service.
General specifications
Properties common to every published source and operating point.
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
1 physical section, each with unique specifications.
Section 1
Published ratings/characteristics promoted from the source; representative section used for repeated identical systems where applicable.
Source-dependent data
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 01
Published operating points and test conditions from this source.
Transconductance
10000 µS
Amplification Factor
5.1
Maximum Plate Voltage
5500 V
Maximum Screen Voltage
800 V
Maximum Plate Dissipation
800 W
Maximum Screen Dissipation
120 W
Maximum Cathode Current
600 mA
Data set 02
Published operating points and test conditions from this source.
Plate voltage
5500 V
RFPower
Plate current
600 mA
RFPower
Power output
1300 W
RFPower
Grid voltage
-500 V
RFPower
Grid current
0 mA
RFPower
Screen voltage
800 V
RFPower
Maximum frequency
30 MHz
RFPower
Grid-to-plate capacitance
0.1 pF
Input capacitance
47 pF
Output capacitance
9.5 pF