Data set 01
1956 Western Electric Tubes
Published operating points and test conditions from this source.
SECTION 1
Tetrode
Characteristic
HeaterOrFilamentVoltage
26 V
HeaterOrFilamentCurrent
2.1 A
Other
Peak Anode Current
15 A
InductiveLoad
Power - Tetrode (NOT beam) (over 1000V 100W) ·Tetrode
715C
Heater-cathode pulse-amplifier tetrode rated for approximately 15 kV anode voltage and 15 A peak anode current into an inductive load.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 1
- Base
- -
- Socket code
- B4A
- Base pins
- 4
- Nominal heater
- 26 V / 2.1 A
Description
Heater-cathode pulse-amplifier tetrode with 15 kV maximum anode voltage and 15 A peak anode current into an inductive load.
Socket description
4-contact B4A physical base
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- B4A
- Base pins
- 4
- Nominal heater voltage
- 26 V
- Nominal heater current
- 2.1 A
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Tetrode
X-ray radiationInterelectrode capacitances
- Max plate voltage
- 15000 V
- Max plate dissipation
- 60 W
Published ratings and characteristics promoted from the supplied Western Electric source.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.