Power - Tetrode (NOT beam) (over 1000V 100W) ·Tetrode
Water-cooled low-drive HF power tetrode for high-power FM and television broadcast transmitters.
6075 is a Tetrode device. Water-cooled low-drive HF tetrode designed for FM and television transmitter power-amplifier service.
General specifications
Properties common to every published source and operating point.
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
1 physical section, each with unique specifications.
Section 1
Published promoted ratings/characteristics captured where applicable; additional source values preserved in parameter rows.
Source-dependent data
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 01
Published operating points and test conditions from this source.
Maximum frequency at full ratings
220 MHz
Anode dissipation capability
2 kW
Grid-to-plate capacitance maximum
0.35 pF
Input capacitance
23.5 pF
Output capacitance
8.4 pF
Data set 02
Published operating points and test conditions from this source.
Amplification factor
7.5
Maximum frequency full input
220 MHz
Maximum frequency high-voltage condition
75 MHz
Grid-to-plate capacitance
0.2 pF
Input capacitance
24 pF
Output capacitance
8.5 pF
Maximum plate dissipation
3000 W
Plate voltage
4000 V
ClassC
Plate current
1.1 A
ClassC
Power output
3300 W
ClassC
Grid voltage
-250 V
ClassC
Grid current
70 mA
ClassC
Screen voltage
800 V
ClassC
Plate voltage
5000 V
ClassC HighVoltage
Power output
4100 W
ClassC HighVoltage
Data set 03
Published operating points and test conditions from this source.
Plate voltage
4000 V
RFAmplifier
Plate current
1.1 A
RFAmplifier
RF output power
3300 W
RFAmplifier
Grid voltage
-250 V
RFAmplifier
Grid current
70 mA
RFAmplifier
Screen voltage
800 V
RFAmplifier
Maximum frequency at full input rating
220 MHz
Input capacitance
24 pF
Output capacitance
8.5 pF