Data set 01
1950 Sylvania
Published operating points and test conditions from this source.
SECTION 1
Cathode Ray
Other
Heater Voltage
6.3 V
Nominal
Heater Current
600 mA
Nominal
Specialized - Cathode Ray ·CathodeRay
5BNP16
Five-inch flying-spot scanner CRT with electrostatic focusing, magnetic deflection, clear faceplate, and an aluminized P16 ultraviolet-emitting screen. Its high-voltage anode system reaches about 19.8 kV for optical scanning.
Directly heatedCold cathodeCommon cathodeDissimilarSpecialized
- Sections
- 1
- Base
- 12M
- Socket code
- DUODECAL6
- Base pins
- 12
- Nominal heater
- 6.3 V / 600 mA
Description
Five-inch flying-spot scanner CRT with electrostatic focus, magnetic deflection, clear faceplate, and aluminized P16 ultraviolet-emitting screen.
Socket description
Small-shell Duodecal 6-contact CRT base
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- 12M
- Socket code
- DUODECAL6
- Base pins
- 12
- Nominal heater voltage
- 6.3 V
- Nominal heater current
- 600 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
12M - Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Cathode Ray
X-ray radiationInterelectrode capacitances
- Max plate voltage
- 19800 V
Cathode-ray electron-gun/display section.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 02
1965 Sylvania Electronic Tubes Vol3
Published operating points and test conditions from this source.
SECTION 1
Cathode Ray
Capacitance
Cathode to all other electrodes capacitance
5 pF
Grid No. 1 to all other electrodes capacitance
6 pF
Other
Maximum anode voltage
19800 V
Grid No. 4 focus voltage range
-550 to 1100 V
Maximum grid No. 2 voltage
550 V
Peak heater-cathode voltage during warm-up
450 V
Peak heater-cathode voltage after warm-up
200 V
Typical anode voltage
14000 V
Typical grid No. 4 focus voltage range
-50 to 350 V
Typical grid No. 2 voltage
300 V
Grid No. 1 cutoff voltage range
-72 to -28 V
CircuitValue
Grid No. 1 circuit resistance maximum
1.5 MOhm