Skip to main content
Tube Tinker — Electron Tube Database
Alternatives & variationsDownload PDF datasheet

Specialized - Cathode Ray ·CathodeRay

23ENP4

Twenty-three-inch 92-degree RCA Pan-O-Ply monochrome television CRT with low-voltage electrostatic focus and magnetic deflection. Integral implosion protection supports large-screen direct-view receiver operation.

Directly heatedCold cathodeCommon cathodeDissimilarSpecialized
Sections
1
Base
-
Socket code
B12D
Base pins
6
Nominal heater
6.3 V / 600 A

Description

23-inch 92-degree RCA Pan-O-Ply monochrome television CRT with low-voltage electrostatic focus.

Socket description

Duodecar 12-contact

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
-
Socket code
B12D
Base pins
6
Nominal heater voltage
6.3 V
Nominal heater current
600 A
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Cathode Ray

X-ray radiationInterelectrode capacitances
Max plate voltage
25000 V

CRT-specific ratings, operating conditions, capacitances, focus/deflection, cutoff, optical, and screen data are retained in section parameters.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1964 RMA EIA

Published operating points and test conditions from this source.

SECTION 1

Cathode Ray

Characteristics

  • Focusing method

    Electrostatic

  • Deflection method

    Magnetic

  • Horizontal deflection angle

    81 deg

  • Vertical deflection angle

    66 deg

  • Diagonal deflection angle

    92 deg

  • Heater voltage

    6.3 V

  • Heater current

    600 mA

Capacitance

  • Cathode-to-all capacitance

    5 pF

  • Grid1-to-all capacitance

    6 pF

  • External coating capacitance minimum

    2000 pF

  • External coating capacitance maximum

    2500 pF

Other

  • Anode voltage maximum

    25000 V

  • Anode voltage minimum

    11000 V

  • Typical anode voltage

    20000 V

Application

  • Application

    Monochrome television picture display

Data set 02

1971 RCA HB3 Binder 1 of 7

Published operating points and test conditions from this source.

SECTION 1

Cathode Ray

Characteristics

  • LOW-VOLTAGE ELECTROSTATIC FOCUS

    92 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • Grid No,l to all other electrodes

    6 pF

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • Heater Current at 6.3 volts — published value 1

    6.3 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • Heater Current at 6.3 volts — published value 2

    600 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • Heater Warm-up Time (Average)

    11

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • Light transmission at center (Approx )

    42

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • Projected Area of Screen

    282

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • Anode Voltage

    20000 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • Grid-No.4 Voltage b

    2 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • Grid-No.2 Voltaoe

    50 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • extinction of focused raster — published value 1

    3 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • extinction of focused raster — published value 2

    5 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • b 7ne grid—No.0 voltage required

    7 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • current of 200 microamperes on a13-1/2—inch by 18—inr.n pattern from an — published value 1

    200 uA

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • current of 200 microamperes on a13-1/2—inch by 18—inr.n pattern from an — published value 2

    1 uA

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • current of 200 microamperes on a13-1/2—inch by 18—inr.n pattern from an — published value 3

    2 uA

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • current of 200 microamperes on a13-1/2—inch by 18—inr.n pattern from an — published value 4

    18 uA

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

Other

  • External conductive coating to anodes

    2500 mA

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • Anode Voltage

    25000 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • Heater '€oltage

    6.9 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • Combined AC & DC voltage

    200 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • Grid-No.1 Circuit Resistance

    1.5 mA

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.