Skip to main content

Specialized - Cathode Ray ·CathodeRay

23CP4

Twenty-three-inch direct-view monochrome television picture tube with electrostatic focusing, magnetic deflection, and an aluminized P4 screen. Manufacturer documentation places it in the high-voltage receiver CRT family used for bright rectangular picture presentation.

Directly heatedCold cathodeCommon cathodeDissimilarSpecialized
Sections
1
Base
-
Socket code
NEOEIGHTAR7
Base pins
7
Nominal heater
6.3 V / 600 mA

Description

23-inch direct-view monochrome television CRT with electrostatic focus, magnetic deflection, aluminized P4 screen, and gray/filter faceplate construction.

Socket description

Small-button Neoeightar 7-contact CRT base family

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
-
Socket code
NEOEIGHTAR7
Base pins
7
Nominal heater voltage
6.3 V
Nominal heater current
600 mA
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Cathode Ray

X-ray radiationInterelectrode capacitances
Max plate voltage
12000 V
Max screen voltage
500 V

CRT-specific ratings, operating conditions, capacitances, focus/deflection, cutoff, optical, and screen data are retained in section parameters.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1950 Sylvania

Published operating points and test conditions from this source.

SECTION 1

Cathode Ray

Characteristics

  • Phosphor

    P4

  • Deflection method

    Magnetic

  • Focusing method

    Electrostatic

Data set 02

1965 Sylvania Electronic Tubes Vol3

Published operating points and test conditions from this source.

SECTION 1

Cathode Ray

Characteristics

  • Focusing method

    Electrostatic

  • Deflection method

    Magnetic

  • Horizontal deflection angle

    99 deg

  • Diagonal deflection angle

    110 deg

  • Vertical deflection angle

    82 deg

  • Fluorescence

    White

  • Persistence

    Short to medium

  • Heater voltage

    6.3 V

  • Heater current

    600 mA

Construction

  • Phosphor

    Aluminized P4

Other

  • Maximum anode voltage

    22000 V

  • Typical anode voltage

    16000 V

  • Typical focus-electrode voltage maximum

    400 V

  • Typical grid2 voltage

    300 V

  • Cutoff voltage range

    -35 to -72 V

  • Grid1 circuit resistance maximum

    1.5 Mohm

  • Focus-electrode voltage minimum

    -550 V

  • Focus-electrode voltage maximum

    1100 V

  • Grid2 voltage maximum

    550 V

  • X-radiation precaution

    Operate within published maximum anode-voltage rating; source carries X-radiation warning at elevated EHT.

Capacitance

  • Grid1-to-all capacitance

    6 pF

  • External conductive coating to anode capacitance maximum

    2500 pF

Application

  • Application

    Monochrome television picture display

Data set 03

1971 RCA HB3 Binder 1 of 7

Published operating points and test conditions from this source.

SECTION 1

Cathode Ray

Characteristics

  • Voltage (AC or DC) — published value 1

    6.3 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • Voltage (AC or DC) — published value 2

    10 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • Current at 6.3 volts — published value 1

    6.3 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • Current at 6.3 volts — published value 2

    0.6 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • Current at 6.3 volts — published value 3

    5 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • Grid No.1 to all other electrodes

    6

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • Total light transmission (Approx )

    40

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • nal deflection — published value 1

    50

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • nal deflection — published value 2

    1

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • nal deflection — published value 3

    4

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • zontal deflection — published value 1

    4

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • zontal deflection — published value 2

    35

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • zontal deflection — published value 3

    1

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • zontal deflection — published value 4

    4

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • cal deflection — published value 1

    45

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • cal deflection — published value 2

    1

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • cal deflection — published value 3

    2

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • cal deflection — published value 4

    35

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • nal deflection — published value 1

    2

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • nal deflection — published value 2

    31

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • nal deflection — published value 3

    1

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • nal deflection — published value 4

    2

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • zontal deflection — published value 1

    4

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • zontal deflection — published value 2

    26

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • zontal deflection — published value 3

    1

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • zontal deflection — published value 4

    2

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • cal deflection — published value 1

    4

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • cal deflection — published value 2

    18

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • cal deflection — published value 3

    1

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • cal deflection — published value 4

    2

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • and grid—No.2 voltage (6~cZk) between zoo and goo volts

    6 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • focus* — published value 1

    0 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • focus* — published value 2

    400 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • Grid-No.4 Current — published value 1

    -25

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • Grid-No.4 Current — published value 2

    25

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • Grid-No.2 Current — published value 1

    -15

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • Grid-No.2 Current — published value 2

    15

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • focused raster — published value 1

    -44 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • focused raster — published value 2

    -94 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • With any ultor-to-grid-No.1 voltage f8cgg il between 12000

    12000 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • and 20000 volts and grid-No.2-to-grid-No.1 voltage 18c2gi1 — published value 1

    20000 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • and 20000 volts and grid-No.2-to-grid-No.1 voltage 18c2gi1 — published value 2

    18 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • Voltage for focus* — published value 1

    0 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • Voltage for focus* — published value 2

    400 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • No.1 voltage of

    18000 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • for focus* — published value 1

    0 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • for focus* — published value 2

    400 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • focused raster — published value 1

    42 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • focused raster — published value 2

    78 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • i ninux ultor (or ultor—to—gqrid—No. 1) voltage is,11 000 volts below — published value 1

    1 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • i ninux ultor (or ultor—to—gqrid—No. 1) voltage is,11 000 volts below — published value 2

    11000 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • focus of any individual tube may have a value anywhere Det wean 0 and

    0 mA

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • No.2 (or grid—No.2—to—grid—Xo. 1) voltage, within design ranges sno wn

    1 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • u ndeflected Focused spot will fall within a circie having a 3/9—inch — published value 1

    3

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • u ndeflected Focused spot will fall within a circie having a 3/9—inch — published value 2

    9

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • that the ea rth~s magnetic field can cause as much as 1/2—inch deflection — published value 1

    1 mA

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • that the ea rth~s magnetic field can cause as much as 1/2—inch deflection — published value 2

    2 mA

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • SEE NOTE 6

    6

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • ULTOR VOLTS = 12000 TO 20000 — published value 1

    12000 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • ULTOR VOLTS = 12000 TO 20000 — published value 2

    20000 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • GRID—N~4 VOWS ADJUSTED FOR FOCUS

    4

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • GRID-N'2 VOLTS

    2 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • ULTOR-TO-GRID-N~IVOLTS=12000 TO 20000 — published value 1

    12000 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • ULTOR-TO-GRID-N~IVOLTS=12000 TO 20000 — published value 2

    20000 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • GRID—N~4-TO-GRID-Nel VOLTS ADJUSTED FOR FOCUS

    4 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • GRID —Ns 2—TO—GRID—N~1 VOLTS — published value 1

    2 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • GRID —Ns 2—TO—GRID—N~1 VOLTS — published value 2

    1 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • UITOR—TO—GRID—N41 VOLTS=16000 — published value 1

    16000 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

Other

  • GRID-No.2 VOLTAGE

    500 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • Heater positive with respect to cathode

    180 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • Grid-No.l-Circuit Resistance

    1.5 mA

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • GRID-No.2-TO-GRIC-No.l VOLTAGE

    640 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • GRID-No.2-TO-CATHODE VOLTAGE

    500 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.

  • Heater positive with respect to cathode

    180 V

    Published CRT datasheet value; multiple numbers on one source row represent separate limits or operating conditions.