Tube cross-reference
1T4 alternatives, equivalents, and replacements
Review exact electrical variations and directional substitutions recorded for the 1T4 voltage pentode or tetrode (under 100v). Compare core specifications and verify every restriction before using a replacement.
Exact variations of 1T4
These designations belong to the same electrical variation group. Their names may differ because of international standards, manufacturing tolerances, or materials, but they are recorded as electrically equivalent—not merely substitutes.
DF91 Voltage Pentode or Tetrode (under 100V)
- Base
- B7G
- Socket
- B7G
- Base pins
- 7
- Sections
- 1
- Heater voltage
- 1.4 V
- Heater current
- 0.05 A
Replacement tubes for 1T4
The following tubes are recorded as possible replacements for 1T4. This direction does not establish that 1T4 can replace them.
Voltage Pentode - Remote Cutoff (single)
The database records 1F3 as a possible replacement for1T4.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode or Tetrode (under 100V) | Voltage Pentode - Remote Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 8AR | Not recorded |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 1.4 V | 1.4 V |
| Heater current | 0.05 A | 0.05 A |
Voltage Pentode or Tetrode (under 100V)
The database records DF91 as a possible replacement for1T4.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode or Tetrode (under 100V) | Voltage Pentode or Tetrode (under 100V) |
| Construction | Pentode | Pentode |
| Base | 8AR | B7G |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 1.4 V | 1.4 V |
| Heater current | 0.05 A | 0.05 A |
Voltage Pentode - Remote Cutoff (single)
The database records W17 as a possible replacement for1T4.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode or Tetrode (under 100V) | Voltage Pentode - Remote Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 8AR | Not recorded |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 1.4 V | 1.4 V |
| Heater current | 0.05 A | 0.05 A |
Voltage Pentode - Remote Cutoff (single)
The database records 1T4WA as a possible replacement for1T4.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode or Tetrode (under 100V) | Voltage Pentode - Remote Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 8AR | 6AR |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 1.4 V | 1.25 V |
| Heater current | 0.05 A | 0.05 A |
Voltage Pentode - Sharp Cutoff (single)
The database records 1AE4 as a possible replacement for1T4.
- Parallel heater circuits only
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode or Tetrode (under 100V) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 8AR | 6AR |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 1.4 V | 1.25 V |
| Heater current | 0.05 A | 0.1 A |
Voltage Pentode - Sharp Cutoff (single)
The database records 1AF4 as a possible replacement for1T4.
- Parallel heater circuits only
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode or Tetrode (under 100V) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 8AR | 6AR |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 1.4 V | 1.4 V |
| Heater current | 0.05 A | 0.025 A |
Voltage Pentode or Tetrode (under 100V)
The database records 1AJ4 as a possible replacement for1T4.
- Parallel heater circuits only
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode or Tetrode (under 100V) | Voltage Pentode or Tetrode (under 100V) |
| Construction | Pentode | Pentode |
| Base | 8AR | 6AR |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 1.4 V | 1.4 V |
| Heater current | 0.05 A | 0.025 A |
Where 1T4 can be used as the replacement
In these recorded relationships, 1T4 is the replacement tube. The listed original tubes are not automatically suitable as replacements for 1T4.
Voltage Pentode - Remote Cutoff (single)
The database records 1T4 as a possible replacement for1F3.
No special restrictions are recorded for this substitution.
| Specification | 1T4 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode or Tetrode (under 100V) | Voltage Pentode - Remote Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 8AR | Not recorded |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 1.4 V | 1.4 V |
| Heater current | 0.05 A | 0.05 A |
Voltage Pentode or Tetrode (under 100V)
The database records 1T4 as a possible replacement forDF91.
No special restrictions are recorded for this substitution.
| Specification | 1T4 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode or Tetrode (under 100V) | Voltage Pentode or Tetrode (under 100V) |
| Construction | Pentode | Pentode |
| Base | 8AR | B7G |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 1.4 V | 1.4 V |
| Heater current | 0.05 A | 0.05 A |
Voltage Pentode - Remote Cutoff (single)
The database records 1T4 as a possible replacement forW17.
No special restrictions are recorded for this substitution.
| Specification | 1T4 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode or Tetrode (under 100V) | Voltage Pentode - Remote Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 8AR | Not recorded |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 1.4 V | 1.4 V |
| Heater current | 0.05 A | 0.05 A |
Voltage Pentode - Sharp Cutoff (single)
The database records 1T4 as a possible replacement for1AF4.
- Parallel heater circuits only
| Specification | 1T4 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode or Tetrode (under 100V) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 8AR | 6AR |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 1.4 V | 1.4 V |
| Heater current | 0.05 A | 0.025 A |
Voltage Pentode or Tetrode (under 100V)
The database records 1T4 as a possible replacement for1AJ4.
- Parallel heater circuits only
| Specification | 1T4 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode or Tetrode (under 100V) | Voltage Pentode or Tetrode (under 100V) |
| Construction | Pentode | Pentode |
| Base | 8AR | 6AR |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 1.4 V | 1.4 V |
| Heater current | 0.05 A | 0.025 A |
Verify before substituting
Matching a base or heater voltage is not enough to prove that two tubes are interchangeable. Check pin connections, heater current, maximum ratings, bias requirements, warm-up behavior, and the equipment manufacturer’s service documentation before making a substitution.
View the complete 1T4 specifications →