Electronic tube type
Power - Triode (over 1000V 100W) vacuum tubes
Power - Triode (over 1000V 100W) records in Tube Tinker cover 928 tube designations, including 2,258 preserved original datasheets. Compare bases, sockets, heater requirements, construction, exact variations, and directional replacement options.
- Tube records
- 928
- Original datasheets
- 2,258
- Variation families
- 15
- Tubes with alternatives
- 7
About Power - Triode (over 1000V 100W) tubes
Tubes of this type must have a power triode section which takes priority. The max plate watt rating must be over 100 watts and max plate volts over 1000 volts. Qualification also says that this tube did NOT qualify as "HorizontalSweep" or "VerticalSweep"
Electrical range
- Nominal heater voltage
- 3.2–80 V
- Nominal heater current
- 0.24–1,900 A
Common power - triode (over 1000v 100w) characteristics
These are the most frequently recorded attributes among tubes in this category.
Bases
- E11-816
Sockets
- UX411
- JUMBO4B7
- B4B6
- E116
- MEDIUM4BAYONET6
- GIANT55
- J45
- SPECIAL45
Constructions
- Triode928
Power - Triode (over 1000V 100W) tube list
Page 20 of 20
YD1334 Triode
Forced-air-cooled metal-ceramic coaxial power triode for Class AB broadband television-transposer service to approximately 1 GHz. Rated for approximately 1.8 kW plate dissipation for high-power UHF television amplification.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
YD1335 Triode
Forced-air-cooled metal-ceramic coaxial power triode for broadband television sound and vision amplification through approximately 1 GHz. High transconductance and nearly 2 kW plate dissipation support substantial professional UHF broadcast power.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
YD1336 Triode
Forced-air-cooled metal-ceramic coaxial power triode for Class AB television transposer and broadband amplifier service through approximately 1 GHz. High transconductance and substantial dissipation support professional UHF broadcast amplification.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
YU108 Triode
Ceramic-metal power triode for amplifier, oscillator, and modulator service with a mechanically rugged thoriated-tungsten mesh filament. Approximately 6 kW plate dissipation and 9 kV capability support substantial professional RF and industrial power.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 7 V
- Sections
- 1
YU148 Triode
Forced-air-cooled high-mu power triode for grounded-grid VHF amplifier, oscillator, and modulator service. Approximately 6 kW plate dissipation, 7 kV capability, and very high gain support powerful professional RF stages.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 7 V
- Sections
- 1
YU191A Triode
Eimac ceramic-metal water-cooled high-mu power triode for amplifier, oscillator, modulator, and voltage-regulator applications. Approximately 7 kW plate dissipation and high gain support substantial grounded-grid and control power.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 7.5 V
- Sections
- 1
ZB3200 Triode
Forced-air-cooled Amperex high-power triode intended principally for broadcast service. Approximately 2.5 kW plate dissipation and 10 kV capability support several kilowatts of zero-bias RF output.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 21.5 V
- Sections
- 1
ZD12YA Triode
Water- and air-cooled modulating power triode for Class A or Class B low- and high-frequency amplification. Approximately 12 kW anode dissipation and 12 kV capability support major transmitter-modulator power.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
ZD1XB Triode
Forced-air-cooled modulating power triode for Class A low-frequency and high-frequency power-amplifier service. Approximately 1.2 kW anode dissipation and 6 kV capability support substantial professional amplifier power.
- Base
- Not recorded
- Socket
- DUOPIN2
- Heater
- Not recorded
- Sections
- 1
ZD3XH Triode
Forced-air-cooled thoriated-tungsten modulating power triode for audio or RF amplification through approximately 60 MHz and voltage-stabilizer service. Approximately 3 kW dissipation and 6 kV capability support substantial power.
- Base
- Not recorded
- Socket
- B5F
- Heater
- Not recorded
- Sections
- 1
ZD8XA Triode
Forced-air-cooled modulating power triode for Class A or Class B low- and high-frequency amplification. Approximately 8 kW anode dissipation and 12 kV capability support major professional amplifier and modulator service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
ZP1016B Triode
Metal-ceramic triode designed for high-voltage series-regulator service to approximately 10 kV with about 300 W plate dissipation.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
ZP1024 Triode
Plate-pulsed grounded-grid oscillator triode for approximately 1.1 GHz Class C operation, producing about 15 kW useful pulse output.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
ZP1025 Triode
Forced-air-cooled metal-ceramic triode designed for pulsed L-band grounded-grid oscillator service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
ZP1026 Triode
Heat-sink-cooled General Electric power triode for grid-pulsed amplifier operation in the L-band. Multi-kilovolt plate capability and specialized pulse construction support high-power microwave transmitter service.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1
ZP1057 Triode
Forced-air-cooled metal-ceramic triode with internal feedback for continuous-wave microwave oscillator service to approximately 2 GHz.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1