Tube cross-reference
XL500 alternatives, equivalents, and replacements
Review exact electrical variations and directional substitutions recorded for the XL500 power - tv horizontal output (sweep). Compare core specifications and verify every restriction before using a replacement.
Exact variations of XL500
These designations belong to the same electrical variation group. Their names may differ because of international standards, manufacturing tolerances, or materials, but they are recorded as electrically equivalent—not merely substitutes.
13GB5 Power - TV Horizontal Output (sweep)
- Base
- 9NH
- Socket
- B9A
- Base pins
- 9
- Sections
- 1
- Heater voltage
- 13.3 V
- Heater current
- 0.6 A
Replacement tubes for XL500
The following tubes are recorded as possible replacements for XL500. This direction does not establish that XL500 can replace them.
Power - TV Horizontal Output (sweep)
The database records 13GB5 as a possible replacement forXL500.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Power - TV Horizontal Output (sweep) | Power - TV Horizontal Output (sweep) |
| Construction | BeamPower | BeamPower |
| Base | 9NH | 9NH |
| Socket | B9D | B9A |
| Base pins | 9 | 9 |
| Sections | 1 | 1 |
| Heater voltage | 13.3 V | 13.3 V |
| Heater current | 0.6 A | 0.6 A |
Where XL500 can be used as the replacement
In these recorded relationships, XL500 is the replacement tube. The listed original tubes are not automatically suitable as replacements for XL500.
Power - TV Horizontal Output (sweep)
The database records XL500 as a possible replacement for13GB5.
No special restrictions are recorded for this substitution.
| Specification | XL500 replacement | Original tube |
|---|---|---|
| Tube type | Power - TV Horizontal Output (sweep) | Power - TV Horizontal Output (sweep) |
| Construction | BeamPower | BeamPower |
| Base | 9NH | 9NH |
| Socket | B9D | B9A |
| Base pins | 9 | 9 |
| Sections | 1 | 1 |
| Heater voltage | 13.3 V | 13.3 V |
| Heater current | 0.6 A | 0.6 A |
Verify before substituting
Matching a base or heater voltage is not enough to prove that two tubes are interchangeable. Check pin connections, heater current, maximum ratings, bias requirements, warm-up behavior, and the equipment manufacturer’s service documentation before making a substitution.
View the complete XL500 specifications →