Specialized - Magnetron ·Magnetron
X1153C
Eimac X-1153-C low-noise voltage-tunable continuous-wave magnetron operating from 600 to 1200 MHz, with 6.3 V 0.8 A AC heater.
- Sections
- 1
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater
- 6.3 V / 800 mA
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater voltage
- 6.3 V
- Nominal heater current
- 800 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Magnetron
- Max plate voltage
- 2300 V
- Max cathode current
- 10 mA
Eimac X-1153-C CW voltage-tunable magnetron: anode 1000–2000 V typical, maximum 2300 V; cathode current 2–4 mA typical, 10 mA max. Injection anode typical 100 V / 0.02 mA, maximum +300 V / 1 mA. RF frequency 600–1200 MHz; output typical 30–50 mW, minimum 20 mW, FM sensitivity 0.66 MHz/V, load 50 Ω, VSWR <=2:1, noise -85 dB. Conduction cooled; magnet temperature <70 °C.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.