Alternatives & variations Download PDF datasheet

X1150

Packaged voltage-tunable continuous-wave magnetron designed for electronically tuned microwave oscillator service across its specified frequency range.

Directly heatedCold cathodeCommon cathodeDissimilarSpecialized

Sections: 1
Base: -
Socket code: -
Base pins: -
Nominal heater: 6.3 V / 800 mA

Description

Voltage-tunable L-band magnetron oscillator covering 980–1020 MHz; forced-air cooled.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base: -
Socket code: -
Base pins: -
Nominal heater voltage: 6.3 V
Nominal heater current: 800 mA
Parallel heater voltage: -
Parallel heater current: -
Series capable: No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Magnetron

X-ray radiationInterelectrode capacitances

Max cathode current: 60 mA

Microwave-device ratings have no dedicated promoted voltage/dissipation columns in this schema; applicable maximum cathode current is promoted and specialized published ratings are preserved in TUBE_SECTION_PARAMETER.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1962 Eimac

Published operating points and test conditions from this source.

SECTION 1

Magnetron

Characteristic

Frequency Range
980 to 1020
Anode FM Sensitivity
45 MHz/V
Load Impedance
50 ohm

Other

Anode Voltage
2040 to 2120
Cathode Current
45 to 50
Typical Output Power
45 W
Injection Anode Voltage
200 V
Injection Anode Current
0 mA
Maximum Anode Voltage
2500 V
Maximum Cathode Current
60 mA
Maximum Injection Anode Voltage
500 V
Maximum Injection Anode Current
1 mA