Voltage Regulator ·VoltageRegulator
Cold-cathode glow-discharge voltage stabilizer for heaterless shunt regulation and reference service in electronic power supplies.
Cold-cathode gas-filled voltage stabiliser for industrial and radio equipment.
General specifications
Properties common to every published source and operating point.
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
1 physical section, each with unique specifications.
Section 1
Published maximum ratings and characteristics audited; remaining useful numerical data retained in parameter table.
Source-dependent data
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 01
Published operating points and test conditions from this source.
Maximum stabilising voltage at 40 mA
81 V
Published datasheet value
Maximum peak current
100 mA
Published datasheet value
Minimum stabilising voltage at 5 mA
70 V
Published datasheet value
Data set 02
Published operating points and test conditions from this source.
VOLTAGE STABILISER QS1 [1]
50 V
VOLTAGE STABILISER QS150/40
VOLTAGE STABILISER QS1 [2]
40 V
VOLTAGE STABILISER QS150/40
Stability {( [1]
1000
Stability {(1000 hr, period) *2 ¥2 %
Stability {( [2]
2
Stability {(1000 hr, period) *2 ¥2 %
Stability {( [3]
2
Stability {(1000 hr, period) *2 ¥2 %
Published value
10 mA
10 mA should be allowed in addition to the load current.
Stabilized voltage
75 V
Published regulated voltage.
Tube current minimum
5 mA
Minimum maintaining current.
Tube current maximum
40 mA
Maximum operating current.
Ignition voltage
105 V
Published minimum or maximum ignition/start voltage as applicable.