Alternatives & variations Download PDF datasheet

VI11532

Indirectly heated high-voltage pulse rectifier designed particularly for charging service. Its tens-of-kilovolts reverse-voltage capability and very high peak anode current suit pulse-power systems.

Directly heatedCold cathodeCommon cathodeDissimilar

Sections: 1
Base: -
Socket code: -
Base pins: -
Nominal heater: 6.3 V / -

Description

The VI1-15/32 is an indirectly heated high-voltage rectifier tube used as a charging rectifier, rated at 32 kV peak reverse voltage and 15 A peak anode current.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base: -
Socket code: -
Base pins: -
Nominal heater voltage: 6.3 V
Nominal heater current: -
Parallel heater voltage: -
Parallel heater current: -
Series capable: No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Rectifier

X-ray radiationInterelectrode capacitances

Max plate dissipation: 80 W
Rectifier peak inverse voltage: 32000 V
Rectifier peak forward current: 15 A
Rectifier warm-up time: 60 s

English text used as primary source; Russian text used only to repair/check ambiguous OCR.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1968 Electronintorg

Published operating points and test conditions from this source.

SECTION 1

Rectifier

Characteristic

Heater/Filament Voltage
6.3 V
Warm-up/Cathode Heating Time
60 s

Other

Peak Reverse Voltage
32000 V
Peak Anode Current
15 A
Anode Dissipation
80 W
Heater Voltage Minimum
5.7 V
Heater Voltage Maximum
6.9 V
Reverse-Voltage Pulse Duration Maximum
4 us
Reverse-Voltage 1/Duty Factor Minimum
500