Rectifier - Half Wave ·Rectifier
Directly heated high-voltage half-wave rectifier for demanding circuits. Its capability reaches roughly 50 kV inverse voltage with moderate output current.
The V1-0.15/55 is a directly heated high-voltage rectifier tube used in rectifier circuits, with reverse-voltage limits depending on average current.
General specifications
Properties common to every published source and operating point.
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
1 physical section, each with unique specifications.
Section 1
English text used as primary source; Russian text used only to repair/check ambiguous OCR.
Source-dependent data
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 01
Published operating points and test conditions from this source.
Heater/Filament Voltage
6.3 V
Warm-up/Cathode Heating Time
3 s
Peak Emission Current Minimum
700 mA
Anode Current Minimum after 500 h
150 mA
Peak Reverse Voltage
50000 V
Peak Anode Current
700 mA
Average/Rectified Anode Current
150 mA
Anode Dissipation
70 W
Reverse Voltage at 150 mA Average
40000 V
Reverse Voltage at 50 mA Average
50000 V