Alternatives & variations Download PDF datasheet

V10140

Directly heated high-voltage half-wave rectifier for demanding circuits. Its roughly 40 kV inverse-voltage capability and moderate current suit specialized power systems.

Directly heatedCold cathodeCommon cathodeDissimilar

Sections: 1
Base: -
Socket code: -
Base pins: -
Nominal heater: 5 V / -

Description

The V1-0.1/40 is a directly heated rectifier tube used in rectifier circuits, with a 40 kV reverse-voltage limit.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base: -
Socket code: -
Base pins: -
Nominal heater voltage: 5 V
Nominal heater current: -
Parallel heater voltage: -
Parallel heater current: -
Series capable: No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Rectifier

X-ray radiationInterelectrode capacitances

Max plate dissipation: 75 W
Rectifier peak inverse voltage: 40000 V
Rectifier nominal output current: 100 mA
Rectifier peak forward current: 750 mA
Rectifier warm-up time: 5 s

English text used as primary source; Russian text used only to repair/check ambiguous OCR.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1968 Electronintorg

Published operating points and test conditions from this source.

SECTION 1

Rectifier

Characteristic

Heater/Filament Voltage
5 V
Warm-up/Cathode Heating Time
5 s
Peak Emission Current
2000 mA
5.5 V filament; 4 kV pulse; 5-10 us; 50 Hz
Anode Current Minimum at 200 V
75 mA

Other

Peak Reverse Voltage
40000 V
Peak Anode Current
750 mA
Average/Rectified Anode Current
100 mA
Anode Dissipation
75 W
Rectified Current
100 mA