Alternatives & variations Download PDF datasheet

V10130

Directly heated high-voltage half-wave rectifier for demanding circuits. Its roughly 30 kV inverse-voltage capability suits specialized professional power supplies.

Directly heatedCold cathodeCommon cathodeDissimilar

Sections: 1
Base: -
Socket code: -
Base pins: -
Nominal heater: 5 V / -

Description

The V1-0.1/30 is a directly heated high-voltage rectifier tube for rectification service, with a 30 kV peak reverse-voltage limit.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base: -
Socket code: -
Base pins: -
Nominal heater voltage: 5 V
Nominal heater current: -
Parallel heater voltage: -
Parallel heater current: -
Series capable: No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Rectifier

X-ray radiationInterelectrode capacitances

Max plate dissipation: 60 W
Rectifier peak inverse voltage: 30000 V
Rectifier nominal output current: 100 mA
Rectifier peak forward current: 400 mA
Rectifier warm-up time: 3 s

English text used as primary source; Russian text used only to repair/check ambiguous OCR.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1968 Electronintorg

Published operating points and test conditions from this source.

SECTION 1

Rectifier

Characteristic

Heater/Filament Voltage
5 V
Peak Emission Current Minimum
800 mA
Anode voltage 1 kV
Emission Current Minimum
290 mA
Anode voltage 300 V
Peak Emission Current after 500 h Minimum
500 mA

Other

Peak Reverse Voltage
30000 V
Peak Anode Current
400 mA
Anode Dissipation
60 W