Skip to main content

Voltage - Triode (single) ·Triode

UC92

RF triode for oscillator or mixer service in FM/AM receivers.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
1
Base
-
Socket code
B7G
Base pins
-
Nominal heater
9.5 V / 100 mA

Description

RF triode for oscillator or mixer service in FM/AM receivers.

Socket description

Miniature 7-contact

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
-
Socket code
B7G
Base pins
-
Nominal heater voltage
9.5 V
Nominal heater current
100 mA
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Triode

X-ray radiationInterelectrode capacitances
Plate resistance
11300 Ω
Transconductance
0.0056 S
Amplification factor
62
Max plate voltage
300 V
Max plate dissipation
2.5 W
Max cathode current
15 mA

Published ratings/characteristics promoted where clearly stated; repeated identical sections compressed where applicable.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1953 RFT Rundfunk Technik

Published operating points and test conditions from this source.

SECTION 1

Triode

Characteristics

  • Heater voltage

    9.5 V

    Published nominal value

  • Heater current

    100 mA

    Published nominal value

  • Transconductance

    5600 µS

    Published operating characteristic

Other

  • Maximum plate dissipation

    2.5 W

    Published maximum rating

Data set 02

1957 Philips Receiving and Amplifying Tubes

Published operating points and test conditions from this source.

SECTION 1

Triode

Application

  • Application

    FM/AM oscillator or mixer

  • Oscillator service

    Published

    OscillatorService

Data set 03

1963 Philips Electron Tubes Handbook V1

Published operating points and test conditions from this source.

SECTION 1

Triode

Other

  • Plate voltage

    100 V

    Oscillator

  • Plate current

    10 mA

    Oscillator

  • Maximum plate voltage

    250 V

Characteristic

  • Transconductance

    5500 uS

  • Amplification factor

    50

Data set 04

1999 Philips E-Z

Published operating points and test conditions from this source.

SECTION 1

Triode

Other

  • Maximum anode voltage

    300 V

  • Maximum anode dissipation

    2.5 W

  • Maximum cathode current

    15 mA