Skip to main content

Power - Triode (over 1000V 100W) ·Triode

TY76000A

Forced-air-cooled RF power triode for high-power transmitting service through roughly 55 MHz. Approximately 6 kW plate dissipation and 7.2 kV capability provide substantial professional RF power.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
1
Base
-
Socket code
-
Base pins
-
Nominal heater
12.6 V / 33 A

Description

Forced-air-cooled RF power triode rated for 6 kW maximum plate dissipation and operation to about 55 MHz.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
-
Socket code
-
Base pins
-
Nominal heater voltage
12.6 V
Nominal heater current
33 A
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Triode

X-ray radiationInterelectrode capacitances
Transconductance
0.015 S
Amplification factor
32
Max plate voltage
7200 V
Max plate dissipation
6000 W
Max grid dissipation
600 W
Max cathode current
2.8 A

Promoted values are mapped from the supplied datasheet; additional published ratings, characteristics, capacitances and operating points are retained in TUBE_SECTION_PARAMETER.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1963 Mullard

Published operating points and test conditions from this source.

SECTION 1

Triode

Other

  • Maximum frequency

    55 MHz

  • Plate voltage maximum

    7200 V

    ClassC;Telegraphy;f<=30MHz

  • Plate current maximum

    2.8 A

    ClassC;Telegraphy;f<=30MHz

  • Grid current maximum

    600 mA

    ClassC;Telegraphy;f<=30MHz

  • Plate dissipation maximum

    6000 W

Capacitance

  • Grid-to-plate capacitance

    11 pF

  • Input capacitance

    16 pF

  • Output capacitance

    0.3 pF

Characteristics

  • Transconductance

    15000 uS

    Va=6kV;Ia=1A

  • Amplification factor

    32 ratio

    Va=6kV;Ia=1A