Alternatives & variations Download PDF datasheet

TE0510

Transmitting power triode intended for RF amplification, oscillator, modulation, or industrial generator service. Manufacturer documentation emphasizes professional radio-frequency operation and substantial power handling.

Directly heatedCold cathodeCommon cathodeDissimilar

Sections: 1
Base: -
Socket code: -
Base pins: -
Nominal heater: 6.3 V / 800 mA

Description

Indirectly heated transmitting triode for portable RF amplifier and oscillator service. The supplied Philips source was read for heater or filament data, ratings, characteristics, capacitances, and representative operating conditions.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base: -
Socket code: -
Base pins: -
Nominal heater voltage: 6.3 V
Nominal heater current: 800 mA
Parallel heater voltage: -
Parallel heater current: -
Series capable: No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Triode

X-ray radiationInterelectrode capacitances

Transconductance: 0.003 S
Amplification factor: 18
Max plate voltage: 500 V
Max plate dissipation: 12 W
Max cathode current: 80 mA

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1999 Philips E-Z

Published operating points and test conditions from this source.

SECTION 1

Triode

Characteristics

Heater/filament voltage
6.3 V
Heater/filament current
800 mA
Transconductance
3000 uS
Amplification factor
18

Other

Maximum plate voltage
500 V
Maximum plate dissipation
12 W
Maximum cathode current
80 mA
Push-pull RF output power
31 W
ClassC;PushPull;TwoTubes;PlateVoltage=500V

Capacitance

Plate/anode capacitance
1 pF
Grid capacitance
3.7 pF
Plate-grid capacitance
3.8 pF