Skip to main content
Tube Tinker — Electron Tube Database
Alternatives & variationsDownload PDF datasheet

Voltage Regulator ·VoltageRegulator

STR15015

Gas-filled 150 V stabilizer operating over approximately 5–15 mA for low-current reference and shunt-regulator service.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
1
Base
-
Socket code
-
Base pins
-
Nominal heater
-

Description

A cold-cathode glow-discharge voltage regulator for automatic, inertia-free stabilization of a DC voltage, designed for high temporal constancy.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
-
Socket code
-
Base pins
-
Nominal heater voltage
-
Nominal heater current
-
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Voltage Regulator

X-ray radiationInterelectrode capacitances
Regulator voltage
150 V
Regulator minimum current
5 mA
Regulator maximum current
15 mA
Regulator starting voltage
180 V
Regulator maintaining voltage
150 V
Regulator dynamic impedance
250 Ω

Published glow-discharge voltage-stabilizer characteristics.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1953 RFT Rundfunk Technik

Published operating points and test conditions from this source.

SECTION 1

Voltage Regulator

Characteristic

  • Nominal maintaining voltage

    150 V

  • Voltage variation over current range

    4.5 V

  • Warm-up / stabilization time

    10 min

Other

  • Current range

    5 to 15 mA

  • Nominal current

    10 mA