Data set 01
1961 AEI Industrial Valves
Published operating points and test conditions from this source.
SECTION 1
Beam Power
Other
Maximum shock
500 g
ShortDuration
Maximum acceleration
2.5 g
Continuous
Maximum bulb temperature
165 C
Power - Beam Single (NOT sweep) (under 10W) ·BeamPower
S6F17F
Flying-lead special-quality beam tetrode intended for pulse and RF amplifier service under severe shock and vibration, combining rugged construction with approximately 8.3 mS transconductance.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 1
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater
- 6.3 V / 300 mA
Description
Special-quality indirectly heated pulse beam tetrode with flying leads, intended for pulse and RF amplifiers under shock and vibration conditions.
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater voltage
- 6.3 V
- Nominal heater current
- 300 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Beam Power
X-ray radiationInterelectrode capacitances
- Transconductance
- 0.0083 S
- Max plate voltage
- 600 V
- Max screen voltage
- 600 V
- Max plate dissipation
- 3.5 W
- Max screen dissipation
- 0.7 W
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 02
1961 Associated Electrical Industries
Published operating points and test conditions from this source.
SECTION 1
Beam Power
Other
Maximum shock
500 g
ShortDuration
Maximum acceleration
2.5 g
Continuous
Maximum bulb temperature
165 C