Skip to main content
Tube Tinker — Electron Tube Database
Alternatives & variationsDownload PDF datasheet

Specialized - Photo Tube ·CameraPickup

S4076

One-inch Newvicon camera tube with magnetic focusing and deflection for low-light surveillance cameras and X-ray television systems. Its highly sensitive photoconductive target supports imaging under difficult illumination.

Directly heatedCold cathodeCommon cathodeDissimilarSpecialized
Sections
1
Base
-
Socket code
DITETRAR8
Base pins
-
Nominal heater
6.3 V / 95 mA

Description

One-inch Newvicon camera tube with magnetic focusing and magnetic deflection for low-light surveillance cameras and X-ray television systems.

Socket description

Small-button Ditetrar 8-pin

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
-
Socket code
DITETRAR8
Base pins
-
Nominal heater voltage
6.3 V
Nominal heater current
95 mA
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

CameraPickup

X-ray radiationInterelectrode capacitances

No fixed ratings are recorded for this section.

Camera imaging section; SectionType=Other because the canonical section vocabulary has no Camera value.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1961 Matsushita

Published operating points and test conditions from this source.

SECTION 1

CameraPickup

Capacitance

  • Target to all other electrodes capacitance

    4.6 pF

Other

  • Grid No. 4 voltage maximum

    - to 1000 V

  • Grid No. 3 voltage maximum

    - to 1000 V

  • Grid No. 2 voltage maximum

    - to 750 V

  • Grid No. 1 negative bias maximum

    -300 to - V

  • Peak heater-cathode voltage, heater negative

    - to 125 V

  • Peak heater-cathode voltage, heater positive

    - to 10 V

  • Target voltage maximum

    - to 50 V

  • Peak output current maximum

    - to 0.8 uA

  • Target voltage

    10 to 25 V

  • Signal current typical

    240 nA

  • Typical grid No. 4 decelerator voltage

    500 V

  • Typical grid No. 3 beam focus voltage

    300 V

  • Typical grid No. 2 accelerator voltage

    300 V

  • Grid No. 1 cutoff voltage

    -100 to -45 V

Characteristics

  • Center limiting resolution typical

    800 TV lines